Surge Tanks & Oil Coolers

[jspec racing]

Hi Guys!!

Jspec Surge Tank: $150 + postage

Jspec Oil Cooler: $ 170 + posage

Both $300

pics below:

Surge Tank

Oil Cooler

Oil Cooler-

This unit is capable of supporting enough Oil flow for engines in excess of 1000 horsepower, and is ideal for forced-induction engines but all N/A Cars will benefit from Having an Oil cooler of this Quality

core size is 600x120x70

you can request if you want it polished or with a silver anodized finish

(no cost difference)

also has the brackets already welded..

Also the fittings on the oil coolers are able to be put on the one side but there is an extra cost because we need to put a separator/divider in the end tank that supports the outlets, 10$$ extra fee for this requirement, also the core is a bar and plate Garrett intercooler

Surge tank -

1.5 litres and has 10mm fittings; it is 80mm thick by 250 in height, also has the fuel pump bracket fixed in so your fuel pump is safely connected at all times

Cheers,

Jase

[rev210]

what 1,000 hp cars are using the oil cooler of this design at the moment? did you ask Garret about whether their core is going to cope with the hydrolic pressure? (you can't compress liquids at all unlike air).

also the piping pictured on that oil cooler kit isnt going to last very long either, try braided or at the very least teflon reinforced high pressure hose. The temperature and pressure will eventually blow that type of hose appart.

[nismo33]

true that.

[jspec racing]

the cooler piping is actually a Teflon heat proofed type. the one in the pic was just for display purposes