Jump to content
SAU Community

PBR clutch Vs Excedy H/D

wheels_24
 Share

Recommended Posts

LEANBAC Grand Master

LEANBAC

Posted
Posted
yer it was a exceddy H/D organic face with a brass button pressure plate. i don't know anything about clutches thats why i posted this thread is this a good clutch

yea it is good,you can let it slip so it takes alot of pressure of your ruinng gear, but do you have to get it imported from jappan? cause i am getting the same one an my one has to

shanef Grand Master

shanef

Posted
Posted

from what i have been told by a few people in another thread on here, if you are looking anyhting over 200rwkw's you should look at a ceramic clutch. I'm going to get the Xtreme heavy duty ceramic cushioned clutch.

LEANBAC Grand Master

LEANBAC

Posted
Posted

Exedy Single Plate Organic Racing Clutch

Exedy Racing clutches with organic friction materials use only premium friction materials that are resistant to slippage and burst. Increased clamp loads give the necessary capacity to handle modifed engines. Organic friction material clutch is the preferred clutch for street and light horse power track.. The Exedy Organic Clutch can increase your stock torque capacity by up to 69% and when compared to other clutches, it offers more bang for your buck.

Cefiro_PWA Rising Star

Cefiro_PWA

Posted
Posted

How do you drive your car ? Do you race it allot?

Do you do burnouts,drift or lots of HARD proper launches?

Ifso, a heavy duty will NOT last. I have burnt them in 1 month of PROPER driving :)

I went button and it lasted me 6 months of the same things i did in a button which lasted 1 month.

Now i have HKS Twin Plate and its been such a long time.. over a year :thankyou:

m&m Rising Star

m&m

Posted
Posted

I have an S15 with 242rwkw.I had the Exedy Hyper Single in for 5 months,all was fine till my first visit to Calder.The clutch let go on the first run.I have since put in an Exedy Twin Plate.It's a bitch taking off normal in traffic,but great when you dial up the revs.Exedy rate their clutches with HP figures.The Hyper Single was rated at 420hp,the twin plate at 700hp.Check the clutch your getting is rated at least 15% more than your power.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ToothDR32
      $5 Clock upgrade for R32 GTR

      By ToothDR32 · Posted

      Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • MissMintyR33
      R33 persistent issues. P/steering and lag/misfire

      By MissMintyR33 · Posted

      I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • jtha7
      Strange issue RB25DET wont start

      By jtha7 · Posted

      Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • GTSBoy
      Freddy Plenum vs Genuine options RB25

      By GTSBoy · Posted

      My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
×
×
  • Create New...