Jump to content
SAU Community

Group Buy - Genuine Hdi Intercooler Piping Kits - From $437

GKTECH

By GKTECH,
in Group Buys

 Share

Recommended Posts

  • 3 weeks later...
Andi Experienced

Andi

Posted
Posted

Hey I noticed on the site you've got an intercooler on a GTiR on your site. Did you use this piping kit to fit it to that GTiR? Is moving the washer bottle and removing tow hook cover necessary for these kits? Any how-to-guides I can have a look at?

Thanks,

Andy

GKTECH Mentor

GKTECH

Posted
  • Author
Posted
Hey I noticed on the site you've got an intercooler on a GTiR on your site. Did you use this piping kit to fit it to that GTiR? Is moving the washer bottle and removing tow hook cover necessary for these kits? Any how-to-guides I can have a look at?

Thanks,

Andy

Piping kit on the gti-r was actually a hybrid copy from one of the group buys on here from one of the other guys (I couldnt be bothered getting in 50 piping kits just to fit my one.... lol)

The washer bottle was moved over a bit and radiator overflow was also moved, tow hook was removed.

I don't have any how to guides at the moment, although the genuine HDi kits that we have coming in come with full instructions. I only have 2 piping kits for gti-r's coming in as there wasn't much interest in these. So 2 piping kits left for gti-r.

Cheers,

Greg

Andi Experienced

Andi

Posted
Posted

So the HDi ones you have are like the Hybrid ones? Will they suit a 450x300x75 intercooler? I don't want to use a 600x300x75 because I believe most of it is surface area isn't being used efficiently and its just a waste.

GKTECH Mentor

GKTECH

Posted
  • Author
Posted
So the HDi ones you have are like the Hybrid ones? Will they suit a 450x300x75 intercooler? I don't want to use a 600x300x75 because I believe most of it is surface area isn't being used efficiently and its just a waste.

Hi mate, have a search on the net and you'll see what HDi is.

We do not sell Hybrid..

Unfortunately the piping will be slightly off if used on a car with 450mm cooler as the kit is designed for 600mm cooler.

The 600's aren't bad especially when you can also get our new GT Spec kit (tube and fin)

At the end of the day its personal opinion.

Ship is confirmed to land on the 7th of August.. Get in quick :D

Cheers,

Greg

  • 2 weeks later...
  • 2 weeks later...
beetle Apprentice

beetle

Posted
Posted (edited)

;)

thanks , Greg ,

package arrived safe and intacked ,All peices were there . looking forward to installing the intercooler,Now the fun starts , Also tahnks to Australia Post .Bunbury WA

Edited by beetle
Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • albyz34gt
      R34 N/a And R34 Turbo (gtt) Transmission.. Uh, Problem.

      By albyz34gt · Posted

      @666DAN sorry to bring you and old thread.     I've got my de+t done and it's all running great other than 1 small issue.    Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd when selected . But nothing when in  drive or what gear your in when you pop it into tiptronic. I'm sure there is maybe 1 wire in the ecu plug I need to move to rectify this. Do ya have any ideas?     Cheers man
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Well I recently changed my rear axles and was thinking if I bumped anything, I have been driving the car for a while now though... But it has been raining today so everything is wet under the wheel arches. Brakes feel fine and can't hear any of the metal screamers, I had a squeak coming from one of the handbrake drums but that seems to have gone away a while ago. I was going down a hill when it lit up and I did feel the abs bite for a second and question why it did it?
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      Correct. Um. I dunno. I haven't cared enough about the way that the NA cars work to know for sure. But..... The 33/34 turbo manual cars have an electronic speed sensor in the gearbox that outputs a +/- (ie, sawtooth AC) voltage signal. That is connected to the speedo. The speedo then outputs a 0-5v square wave (ie, PWM) signal that the ECU (and any other CU on the bus) sees. The speed sensor is NOT directly connected to the ECU. So here's the problem. Your new ECU expects to see the PWM signal, but must somehow be getting a direct signal from the diff speed sensor. Which would suggest that the wiring of the NA car is not the same as the turbo cars. I think you will need to spend some time with (hopefully the wiring diagram for the car) and a multimeter to see what is connected to what. Then, presuming I am correct**, you would then want to separate the ECU speed signal input from the rest of the car's wiring, and probably either buy a speed signal converter, or build one using an arduino (or similar). That would take in the speed sensor signal and output a scaled (and suitably rearranged) signal for the ECU. ** We shouldn't presume that I am correct here, because there might be something else crazy going on. I don't think you could convert the speedo to be fed from the gearbox sensor, because the pulse rate from that sensor is probably different to the diff sensor and then the speedo would read wrongly. And this also wouldn't fix the ECU's problem either, because the ECU doesn't want to see the gearbox signal direct either (assuming that they are all on the same wiring, for some odd NA related reason, see above caveat!) Does this help? Probably not. Can you make it work? Almost certainly. With the above work. You should buy a handheld oscilloscope from Aliexpress so that you can view these signals directly. Connect up the probes and drive the car. Show photos of the screen when drving at known speeds and connected to different places, and we'll see what we can learn about it.
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      Assuming your brake pads are not worn right down, I'd add a little brake fluid. Is there any sign of a brake fluid leak?
    • RB25inside
      R34 Handbrake light saying ON and intermittently flashing

      By RB25inside · Posted

      Hello all,  I need of some help. On my drive home my handbrake light lit up and started flashing. When I got home I checked my handbrake sensor under the centre console and nothing seemed out of the ordinary. I have scanned my car via the consult port, no codes shown. Checked my brake fluid as well which is half full. Tried unplugging the brake master but it didn't change anything. Thoughts on what it could be? The master float doesn't seem to be stuck. My car is an 1998 ER34 sedan GT. No hicas but has ABS Photos below 👇🏾 
×
×
  • Create New...