Jump to content
SAU Community

Recommended Posts

Hi guys, I am new here and have read, and read hundreds of posts to answer my question but am having trouble finding a solid answer.

I have a 93 R33 GTS-T and have blown the turbo. I am wondering what are the cheapest and easiest options for a simple bolt on replacement ??

What different brands offer direct bolt-on replacements ???

Any help you guys can offer will be much appreciated as I am a total newbie to turbos and I have limited funds to replace the blown one. Thanks Trev....

Link to comment
https://www.sau.com.au/forums/topic/80758-direct-bolt-on-replacement-for-rb25/
Share on other sites

If you have limited funds the best bet would be to get the blown turbo reconditioned and high flowed. After getting the turbo high flowed is usuallyg ood for 400hp or so.

Usually costs around 1500.

www.gcg.com.au

Or if you want to spend more money there are heaps of aftermarket items from HKS, TRUST etc etc.

www.nengun.com have some good prices.

Hope this helps

Or are they even any direct bolt on replacements ?? Sorry if these questions are common knowledge but I read for a few hours trying to find a direct replacement with no luck. I have been looking at a few for sale on an auction site but am worried they aren't as they say direct bolt on. I have been told I need to change oil lines and exhaust or something like that. Please guys any help you can offer would be a huge help. Otherwise I have to get this one rebuilt. Again Thanks all for your time and help on this. Have a good week... Trev

buy another stock one .. bolt that back on and keep driving ..and save up some cash to have your blown one rebuild.

few for sale at the moment in the for sale section .. 350 - 450 bucks..

Matt

Thanks for that Matt. Is the stock turbo going to be the only turbo that I can bolt on with no other mods needed ?? The money isnt really an issue anymore because I'd rather upgrade it to a better turbo now than buy a stock one and then spend more money in the future upgrading that one..... Thanks again for everyones help on this..... Cheers Trev...

it'll bolt straight back in.

use it for a little while ..get your blown one hi flowed.. fit that back up ..that'll bolt up all the same as before ..then sell the stock one u used in the mean time.

i mean its up to you really..... GCG is in your area ..well i think they sydney based anyways.. and its about a 4 day turn around or something depending on work load.

most other bolt on turbos will require different oil and water lines.. but u usually buy them as a "bolt on kit" with everything u need to bolt on ..... if u want bolt on ..buy a FULL kit. not just the turbo ....saves u running around that way.

all the best buddy

Matt

Also, a bigger turbo, such as a hiflow GCG or HKS, etc., require the support systems.

Such as: Programmable ECU, Larger injectors, Larger fuel pump, 3in turbo back exhaust, FMIC, etc. If you do not have these fitted and do not want to spend BIG dollars to get them done, i suggest you buy another second hand std turbo.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nope.    Grab a varex and turn it down as you get close to home, win win? 
    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
×
×
  • Create New...