Jump to content
SAU Community

Recommended Posts

Valvoline filters are bad. Far from being high performance. lol

I wouldn't go past genuine ~$no idea, Purulator (~$7), PureOne ~$14.

I'm currently running Mutol 8100 5w40. Its a pretty damn good oil but I am considering making the jump to Castrol 10w60.

  • 5 months later...

You may wanna check ur oil pump, stick a proper oil gauge on it and get a reading, i had a VS commonhore that the oil pump was farked, no reading on the gauge unless revved i jus thought it was faulty gauge until i had it checked by a mech and got same reading. Stupid me did nothin about it and the car survived for another 5 months until it spun a rear main bearing and destroyed my engine when my oil pump finally died..... and with the ticking my R33 has also jus started to do this at idle not really noticable until you go into a surrounded area, but oil pres seems fine.

Has anyone actually resolved their ticking dilemma?

You may wanna check ur oil pump, stick a proper oil gauge on it and get a reading, i had a VS commonhore that the oil pump was farked, no reading on the gauge unless revved i jus thought it was faulty gauge until i had it checked by a mech and got same reading. Stupid me did nothin about it and the car survived for another 5 months until it spun a rear main bearing and destroyed my engine when my oil pump finally died..... and with the ticking my R33 has also jus started to do this at idle not really noticable until you go into a surrounded area, but oil pres seems fine.

Has anyone actually resolved their ticking dilemma?

good reply champ.

yes. out of all these people i think its a bit obvious stright away saying it goes away when you hit the gas pedal is because the oil pump works a bit harder to give it oil pressure thought the engine and the gauge reads 0 when its idling but gives a reading when you get up the revs..that my guess is oil pump for sure esspesially if the gauge use to work and there was no noise now there is noise and the gauge not working is to coincidental...

keep stock oil filter from factory nissan cant go wrong

Hmm... I have an R32 that gives out wierd oil pressure readings.

What should the reading normally be? if it's getting close to 0 when say i'm on the highway at constant revs is it something to worry about?

I don't have any noise coming from my engine like the other guy, i'm just abit curious as to why my gauge move around so much...

Yes i would be worried, mine generally sits close to 4 on the highway and drops to 1st notch on idle once everything is hot and the car is stopped. Jus cause its not making noise dosen mean anything, it will start making noise once it spins a bearing... i would be taking it to a mech and get a proper oil gauge reading straight from the block and if its the same replace your oil pump ASAP!, as they do wear out and is VITAL to ur engine surviving. Right now you are probably starving your engine of oil and it wont take it for long. If you cant afford straight away change to a much thicker oil for the time being to get some pressure back, but be warned the thicker oil will put more strain on your pump again. Hopefully its a dodgy gauge but very unlikely.

Edited by PowerupZ

Actually I think it is a dodgy gauge..

I watched it closely on the highway last time... it sits at about 2 when cruising... then all of a sudden will flicker down to 0, then straight back upto 2..

She will be going in for a service very soon so i'll have her checked out then..

Cheers!

2 sounds pretty high for idle once the engine is warm and has been driven around a bit. When mine is cold or jus warmed and haven flogging it, it will be like that. But generally once i have drove it for a while idle will be jus above 1. What grade oil are you using? Rev is normal at 4 for all the liners i have driven.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...