Jump to content
SAU Community

Recommended Posts

Valvoline filters are bad. Far from being high performance. lol

I wouldn't go past genuine ~$no idea, Purulator (~$7), PureOne ~$14.

I'm currently running Mutol 8100 5w40. Its a pretty damn good oil but I am considering making the jump to Castrol 10w60.

  • 5 months later...

You may wanna check ur oil pump, stick a proper oil gauge on it and get a reading, i had a VS commonhore that the oil pump was farked, no reading on the gauge unless revved i jus thought it was faulty gauge until i had it checked by a mech and got same reading. Stupid me did nothin about it and the car survived for another 5 months until it spun a rear main bearing and destroyed my engine when my oil pump finally died..... and with the ticking my R33 has also jus started to do this at idle not really noticable until you go into a surrounded area, but oil pres seems fine.

Has anyone actually resolved their ticking dilemma?

You may wanna check ur oil pump, stick a proper oil gauge on it and get a reading, i had a VS commonhore that the oil pump was farked, no reading on the gauge unless revved i jus thought it was faulty gauge until i had it checked by a mech and got same reading. Stupid me did nothin about it and the car survived for another 5 months until it spun a rear main bearing and destroyed my engine when my oil pump finally died..... and with the ticking my R33 has also jus started to do this at idle not really noticable until you go into a surrounded area, but oil pres seems fine.

Has anyone actually resolved their ticking dilemma?

good reply champ.

yes. out of all these people i think its a bit obvious stright away saying it goes away when you hit the gas pedal is because the oil pump works a bit harder to give it oil pressure thought the engine and the gauge reads 0 when its idling but gives a reading when you get up the revs..that my guess is oil pump for sure esspesially if the gauge use to work and there was no noise now there is noise and the gauge not working is to coincidental...

keep stock oil filter from factory nissan cant go wrong

Hmm... I have an R32 that gives out wierd oil pressure readings.

What should the reading normally be? if it's getting close to 0 when say i'm on the highway at constant revs is it something to worry about?

I don't have any noise coming from my engine like the other guy, i'm just abit curious as to why my gauge move around so much...

Yes i would be worried, mine generally sits close to 4 on the highway and drops to 1st notch on idle once everything is hot and the car is stopped. Jus cause its not making noise dosen mean anything, it will start making noise once it spins a bearing... i would be taking it to a mech and get a proper oil gauge reading straight from the block and if its the same replace your oil pump ASAP!, as they do wear out and is VITAL to ur engine surviving. Right now you are probably starving your engine of oil and it wont take it for long. If you cant afford straight away change to a much thicker oil for the time being to get some pressure back, but be warned the thicker oil will put more strain on your pump again. Hopefully its a dodgy gauge but very unlikely.

Edited by PowerupZ

Actually I think it is a dodgy gauge..

I watched it closely on the highway last time... it sits at about 2 when cruising... then all of a sudden will flicker down to 0, then straight back upto 2..

She will be going in for a service very soon so i'll have her checked out then..

Cheers!

2 sounds pretty high for idle once the engine is warm and has been driven around a bit. When mine is cold or jus warmed and haven flogging it, it will be like that. But generally once i have drove it for a while idle will be jus above 1. What grade oil are you using? Rev is normal at 4 for all the liners i have driven.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...