Jump to content
SAU Community

X3 R33 CF BONNETs - SELLING CHEAP! MINOR DAMAGED! BUT IN VERY GOOD CONDITION!

JDM Concept
 Share

Recommended Posts

JDM Concept Mentor

JDM Concept

Posted
Posted

hi people

i have 3 cf bonnets for GTR33 up for grap.

They will fit GTR33 and GTS33 only if you change the hinges on left and right side and the latch to those of GTR33.

The only problem is that there are some damages on each bonnet.

They are MINOR damaged on various degree.

Most can be easily repaired doing your own DIY kit. You need fiberglass repair kit to do so.

I usually sell the bonnet for $850 but much more on other shops. usually may cost $1000 and up.

I am selling them below cost price!

- R33 BONNET NO. 1 = $400 (47% off my price)

Link to Bonnet 1 pics

CONDITION RATING 7/10. Minor damaged. can be fixed easily. some marks cant be removed but not visible unless on close up view.

- R33 BONNET NO. 2 = $600 (30% off my price) (SOLD)

Link to Bonnet 2 pics

CONDITION RATING 9/10. Very very minor damaged. can be fixed up easily

- R33 BONNET NO.3 = $550 (35% off my price) (SOLD)

Link to Bonnet 3 pics

CONDITION RATING 8.5/10. Very minor damaged. can be fixed up easily

I DONT MIND SHIPPING INTERSTATE, I WILL PACK AS WELL AS I CAN BUT I CANT BE HELD RESPONSIBLE SHOULD ANYTHING HAPPEN.

MY COURIER COMPANY CHARGES $95.00 PER DELIVERY. COST MORE TO TASSIE AND PERTH.

IF YOU HAVE YOUR OWN DELIVERY COMPANY, PLEASE FEEL FREE TO USE YOUR OWN.

Jenny1983 Rookie

Jenny1983

Posted
Posted

I am very interested in purchasing a bonnet however a few questions first:

1. How did they all get broken? Isn't carbon fibre supposed to be very durable and hard to tear/break?

2. Does this breakage compromise the stability of the bonnet?

3. Why do you need to purchase gtr hinges for the bonnet fit onto a gtst? Isn't the only difference between a gtst and gtr front-end the pumped goards, rb26dett and ancillaries for 4wd?

4. Why are ALL of them broken in similar positions?

5. What is the brown marks on the first bonnet, are they scratches? Why are they brown?

6. It appears that on some of the pictures you have used a blurring tool with a photo editing program (i.e photoshop), is this correct? If so, what are you blurring?

7. The bonnets all appear to be exactly the same style, why the dramatic changes in price for very similar damage?

8. where are you located, and how do you propose delivery?

Sorry if the questions seem silly, I am unexperienced with CF. If you could let me know the answers to the questions that would be great!.

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
I am very interested in purchasing a bonnet however a few questions first:

1. How did they all get broken? Isn't carbon fibre supposed to be very durable and hard to tear/break?

2. Does this breakage compromise the stability of the bonnet?

3. Why do you need to purchase gtr hinges for the bonnet fit onto a gtst? Isn't the only difference between a gtst and gtr front-end the pumped goards, rb26dett and ancillaries for 4wd?

4. Why are ALL of them broken in similar positions?

5. What is the brown marks on the first bonnet, are they scratches? Why are they brown?

6. It appears that on some of the pictures you have used a blurring tool with a photo editing program (i.e photoshop), is this correct? If so, what are you blurring?

7. The bonnets all appear to be exactly the same style, why the dramatic changes in price for very similar damage?

8. where are you located, and how do you propose delivery?

Sorry if the questions seem silly, I am unexperienced with CF. If you could let me know the answers to the questions that would be great!.

1. How did they all get broken? Isn't carbon fibre supposed to be very durable and hard to tear/break?

please refer to this thread for reference

http://www.skylinesaustralia.com/forums/sh...719#post1331719

the bonnets were damaged in transit. mishandled. i tried to get claimed but failed. i was holding them as proof but my claims was denied.

anything is breakable even your skyline! i guess it meet a lof impact when handled. trust me its not pretty when it arrived.

2. Does this breakage compromise the stability of the bonnet?

with proper repairing using firberglass repair kit and reinforcing the ribbing with fiberglass you should be able to get you full 100% stability back. it is a simple job and simple tool to use. many people in bodykit industry should tell you is a an easy job to repair especially bonnet 2 and bonnet 3.

3. Why do you need to purchase gtr hinges for the bonnet fit onto a gtst? Isn't the only difference between a gtst and gtr front-end the pumped goards, rb26dett and ancillaries for 4wd?

you are incorrect im afraid. we tried to fit on a gtst before and the hinges and latches does not match. the bonnet are of the same shape and fit perfectly but the position of the holes on each side of the hinges are different and so is the latch. other than that is perfect alignment. however i must say that this is just a theory at the moment. never been proven before. my comment is based on one time effort to put on in a gtst

4. Why are ALL of them broken in similar positions?

becos they are mishandled in similar fashion hence it is damaged in similar way.

5. What is the brown marks on the first bonnet, are they scratches? Why are they brown?

there is no scratches on any of the bonnets. one bonnet no 1, they are like some defect due to mishandling. the underlying clear coat has given way. it is not a bad thing. it is visible on some angle but if you on the car horizontally, you cant even see it unless you are at some near distance. i have decided to take this pictures to show all the defects and not want to hide anything.

6. It appears that on some of the pictures you have used a blurring tool with a photo editing program (i.e photoshop), is this correct? If so, what are you blurring?

i take the photo as it is. no editing what so ever. i have been an honest seller everywhere i go.

this is the screen-shot of the traders rating. i am sure you will find me to be an honest seller. :P

feedback.jpg

7. The bonnets all appear to be exactly the same style, why the dramatic changes in price for very similar damage?

bonnet 1, has the most damaged among the 3. cracks and some clear coat issue which is not visible when you put it on.

bonnet 2 has very minor damage, slight hairline crack1

bonnet 3 has minor damage, 2 minimal crack as shown in the pics

8. where are you located, and how do you propose delivery?

im in sydney. i prefer if people can pick up in sydney. if interstate, i am happy to deliver it at extra $95.00. i cant afford to foot for the fee as i am already losing money for them. howver, i prefer that you arrange your own transport company and i will be more than happy to corporate with you.

Sorry if the questions seem silly, I am unexperienced with CF. If you could let me know the answers to the questions that would be great!.

No worries! all question answered! :)

lwells Grand Master

lwells

Posted
Posted

The breaks are in the FRP (fibreglass) structure, not the carbon fibre top layer.

Edit: Doh. That will teach me for not refreshing a thread between reading and posting.

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
if i got them could u hook me up wit the parts nessarsary to put them on my R33 GTS-T???

if yes consider bonnet 2 SOLD!!!

you need to source the hinges and the latch on your own unfortunately. if you live in liverpool. there are a lot of places that you can ask around. dont think is an issue here. :wave:

JDM Concept Mentor

JDM Concept

Posted
  • Author
Posted
so its doesnt fit a r33 gtst???? and if so is it a s1 or s2

interested in bonnet 1

it will fit if u change the latch and hinges using a GTR33 one.

 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      The Evolution Of "night Fury"

      By Dose Pipe Sutututu · Posted

      glitch in the matrix haha
    • Dose Pipe Sutututu
      Why am I hitting a power wall with my stroked RB25?

      By Dose Pipe Sutututu · Posted

      A few suggestions: Do you have the option of retarding your exhaust cam gear to bring the power band over to the left? VCT would be turned off after you make peak torque, you see the power/torque will decay faster with it left on all the way to the limiter Once VCT is turned off, you'll find the motor will take a bit more timing being ramped in Send its mum, more boost! Of course, depends on your exhaust pressure.
    • dyl33
      The Evolution Of "night Fury"

      By dyl33 · Posted

      Tow a boat... people won't know wtf is going on 🤣 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I was back on the dyno again yesterday after completely revamping my methanol injection system. I was making 440kw at 19psi. Great, this is more then I was making last summer with my old meth system at that pressure, and I figured it would be smooth sailing up to 30+psi. We continued increasing from there and by 25psi, I had only hit 455kw. Dyno sadly lost utility power at this point and I left. We seemed to be on course to hit the same power wall as last summer (477kw@27psi). This is a built RB25 S1 stroked to a 2.8. Built and ported head with Kelford 272/262 cams. Precision 6466 Turbo. Tuner last year believed the power wall is a mix of RPM limitations (Hydro lifters/Limit set at 7600RPM) and fueling. With my new meth system, we're seeing zero knock now but it still won't go up.  What else can I do at this point? Here's my train of thought.  - It's clear from the dyno graph that I would easily make power to 8500+RPM but I'm limited to 7600RPM. I could risk increasing my limiter, but hydro lifters have me worried. What are my options here besides going NEO head or solid lifter conversion? I'm rocking a 1.05AR turbine on my 6466. Would dropping down to a .84 help shift that power down in anyway? - We're only seeing roughly a 30kw difference at the top end with VCT on or off. Is this normal? I want to confirm VCT is working properly. - Should I look into other cam options?  - Should I just keep increasing boost and see if she wakes up later on? I would expect to hit 600rwkw around 35psi with my 6466.   
    • Murray_Calavera
      iPad gauge cluster

      By Murray_Calavera · Posted

      First thought is to use a ram mount (to hold the ipad) + windscreen suction mount. The arms on the ram mount can be as long as you like, should be able to position the ipad pretty well with that setup. 
×
×
  • Create New...