Jump to content
SAU Community

Recommended Posts

My motor and all the bits are for sale.

Its all tuned and running as a package, just drop it in over a weekend and your away.

Pretty easy :)

I'll try list all the parts. More to come Monday 01/08 when i get an exact copy of what parts

Motor was built by Race Pace Motorsport

All has been tuned/serviced by Race Pace Motorsport only.

All parts used in this build were brand new.

Only 2nd hand part was the GTR Rods which were checked.

Power so thus far:

270rwkw @ 17psi

369rwkw @ 24psi (AutoSalon 2005)

There is more power in the motor without a doubt should you want more

RB25DET

Motor bits

Arias 87mm Forged Pistons

Prepped GTR Rods

Machined/honed/prepped bottom end (and all that goes with it)

Modified Oil galleries

Tomei headgasket

N1 oil pump

N1 water pump

All new belts/pulleys/tensioners

Nismo 740cc injectors

Z32 AFM, comes with intake piping, pod filter etc

Custom aluminium cross-over pipe from Throttle body, with GTR BOV fitted

Huffer side

Garrett Ball Bearing GT30 600hp --> .7 Comp/82 Ext

Genuine Nismo GTS-R lowmount manifold

Turbosmart 45mm Ext Gate --> running a 15psi spring combination

Gate comes with all fittings and a screamer pipe

Dump pipe, with a 1,500km old O2 sensor

PowerFC with Hand Controller is included. This is tuned for this motor (as is now).

Also the full wiring loom is included in this price

Approx: 10,000km's traveled since rebuild. Very fresh still :)

Price: $10,500 ono

PM me if you are interested or wanna talk about doing a deal.

Cheers - ash

Link to comment
https://www.sau.com.au/forums/topic/82277-rb25det-350rwkw-package/
Share on other sites

so why the sale nismoid, bigger plans?

yep :) totally different motor going in in place of this.

Cant really say what yet as im not sure of its configuration at this stage.

Gonna be a (another) 4-6month project.

Which remins me, this comes with the FULL WIRING LOOM!

swappig for stock turbo - no sorry.

Makes my ECU/tuning etc and half the engine useless without it.

Find a buyer for everything bar what you want and then i'll do it

RE: PICS i dont have any but ill get some.

www.fullboost.com.au --> there is one of my many AutoSalon dyno runs there you can download

Find it under "Featured Car on the left hand side, PG.2 of video.

That would be for you to talk to discuss with Ben mate.

Or even ICE, they have done some whack conversions also in the past,

17 psi just over 4200rpm or there abouts.

Pulls to an 8000rpm redline. Its not laggy IMO. Its no different to the loads of others with a GT30/.82 on a 25det

I've got the dyno printouts. I dont have a scanner or digi cam but ill try get em during the week into electronic form.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...