Jump to content
SAU Community

Recommended Posts

Bought from GK Technologies but decided not to hook up to the alarm.

522T - Electronic trunk release - $30 {generic item}

Allows you to pop the trunk from the remote control of your Viper alarm. Also comes with a push button to be mounted inside the cabin. Can be used in many applications besides trunk also.

103T Digital Failsafe Starter Kill - $85

The 103T Digital Failsafe Starter Kill is designed to be used as either a stand-alone passive/active starter kill or as an interface to ESP systems that use a 3-pin data port. The 103T features an illuminated, dash-mounted keypad, code-protected emergency override, and exit/entry Valet code protection.

When used as a stand-alone starter kill, the 103T prevents the starter from cranking whenever the system is armed. You can control the 103T's basic functions from the dash-mounted keypad. Simply enter the coded key sequences to control the starter kill functions.

The 103T can also be used as a serial controller for any of DEI's ESP security systems. The ESP system LED can be plugged into the 103T's keypad port, so that the LED on the keypad functions as the main security system LED. When connected to an ESP system, the 103T can be used to control Panic Mode and emergency override.

Selling the TRUNK for $20 delivered.

Selling the Keypad for $60 delivered.

post-6587-1123082546.jpg

post-6587-1123082557.jpg

post-6587-1123082573.jpg

post-6587-1123082585.jpg

post-6587-1123082597.jpg

hey GTRghost can you send some more info about the key pad starter imob would like to find out a little more please

Cheers Mike

Best way to get more information is search up the model number 103t. It is a DEI product. (directed electronics incorporated)

Both the prices listed here are below my sell price so good to get yourself a bargain.

Cheers,

Greg

No one wants these babies?

Also, where did the trader ratings go!?

I had like 15 feedbacks, and I would be spewing if they where deleted during the server upgrade.

Best way to get more information is search up the model number 103t. It is a DEI product. (directed electronics incorporated)

Both the prices listed here are below my sell price so good to get yourself a bargain.

Cheers,

Greg

No one wants these babies?

Also, where did the trader ratings go!?

I had like 15 feedbacks, and I would be spewing if they where deleted during the server upgrade.

They weren't deleted they are still in the database. They just aren't being displayed at the moment because that part of the front end (the website) needs to be re-coded.

Does it come with DIY instruction? for the starter killer? I want it ;) good for security

Comes with instructions. These are great for security :D

Cheers,

Greg

hey greg ,what comes in the digital failsafe starter kill kit ???

And If not how much for every thing required to hook it up as a stand alone starter kill system??????

Cheers Mike B)

hey greg ,what comes in the digital failsafe starter kill kit ???

And If not how much for every thing required to hook it up as a stand alone starter kill system??????

Cheers Mike  B)

Hi mate, pretty much the keypad and the relays needed to use this unit.

It can be used as 2 different items, either a starter kill OR it can work in conjuction with viper alarm systems and be used to program, arm, disarm etc.

More info here: http://www.drdetailshop.com/103T.htm

I have some available at $85aud + $5 for express post delivery australia wide obvously in this thread they are cheaper :)

Cheers,

Greg

cool Greg Thanks for that You have a PM

+I had a look & yours is a saving of $15 dollars from the web site with delivery, the web one is around $105-106 mark B)

(Its OZ here by the way I cbf signing out of g/f's account)

These arr very good prices.

I sell the keypad for $85 + $5 for delivery

Trunk release for $30 + $5 for delivery.

Save some cash and buy from gtrGhosTDoGG11 :P

Greg

These arr very good prices.

I sell the keypad for $85 + $5 for delivery

Trunk release for $30 + $5 for delivery.

Save some  cash and buy from gtrGhosTDoGG11 :(

Greg

Hey Greg, do you sell/have the relays as shown in the pic? As I bought the one from gtrGhosTDoGG11 and it didnt come with it, do i really need it?

Cheers

David

post-12907-1123738463.jpg

Hey Greg, do you sell/have the relays as shown in the pic? As I bought the one from gtrGhosTDoGG11 and it didnt come with it, do i really need it?

Cheers

David

Hi mate, if you are going to use as a stand alone unit you will need a relay as that is how this item works.

You can get relays from any major electrical place.

If you look in the instruction booklet there is more info in there.

cheers,

Greg

hey mate will the truck release thingy work for other brand alarms becoz i have the funtion on my page gaurd alarm but i dont have that electronic flipper for it to work

thanks simon

=====================================================

William,

As per last PM which was not replyed too I am again asking you to supply the relay needed to use this unit as a stand engine kill as it was not stated that it wouldnt be included when I bought it or and explanation of its where abouts or I will be forced to report you to admin.

It would be a shame to have you banned over somethin so small so if I was you I would reply to my PM so we can reslove this without futher action being taken.

If the relay can not be supplyed i will seek a full refund and return the procduct to you as the terms of the sale have not beeen forfilled.

I can also be contacted on 0***** and I will attemp to contact you via your mobile number untill this is resolved..

Rs,

David

=====================================================

The relay was not not included in the kit. I never said it was there. The pictures displayed everything that was in the kit and for sale.

Why is it my fault?

You are threatning me and saying to me that I'am going to be banned when I didn't do anything wrong? I sold it for cheap, and now you are trying to get me banned.

The kit from DEI ELECTRONICS never had one(I didnt get one), if you did your researched you would of known this. Should the seller be at fault because of this?

Why should I give you a refund?

If you change your mind, a normal business will charge you a restocking fee if they liked you, if they didn't they arnt abliged to give you any refund.

If you would like a refund, you are not going to get a full refund when its your fault. Iam happy for you to return the product to me and pay the postage, and i'll refund you $30.

Will

William,

I have not changed my mind but am rather unhappy that i have to spend extra money so I can use this engine kill unit in my car cos a relay is missing, I treatening you because you did not reply to my PM nor tell me that a relay was not included as when i spoke to you I made it quite clear I was to use it as a stand alone unit.

I will find my own relay and cop the cost incurred, but in the future will not do business with you again.

Rs,

I had no idea that you needed a relay. You should be complaining to Greg that it didnt with one. How much is a relay?

William,

I have not changed my mind but am rather unhappy that i have to spend extra money so I can use this engine kill unit in my car cos a relay is missing, I treatening you because you did not reply to my PM nor tell me that a relay was not included as when i spoke to you I made it quite clear I was to use it as a stand alone unit.

I will find my own relay and cop the cost incurred, but in the future will not do business with you again.

Rs,

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...