Jump to content
SAU Community

Recommended Posts

Year: 1997

Model: R33 GTS-t

KMs: 32,000 (aftermarket speedo) - Only 3,000km have been done in this country!!

Colour: White

Transmission: Manual

Mods:

HKS GT2835 Pro S (integral wastegate) 0.64 exhaust housing

HKS Stainless Steel Tubular Manifold

HKS Intercooler

3" HKS Exhaust (Turbo back)

Greddy Inlet Manifold

Nismo Adjustable Fuel Pressure Reg.

HKS 550cc injectors

HKS Air Filter

Apexi coolant surge tank

Custom Aftermarket alloy radiator

HKS oil cooler and oil filter re-locator

Tomei 270 degree cams with 10.25 mm lift (biggest you can get for an rb25 unless you custom make some)

Tomei Solid Lifters

Tomei Valve Springs

Tomei Adjustable cam gears

Cusco Oil catch can

Upgraded Nismo Fuel pump

HKS F Con V pro (AFM less), a Power FC is supplied so it can be tuned.

Blitz Type R Electronic Boost Controller

Tomei 2 way LSD

OS Giken Twin plate clutch

Nismo Slave cylinder

Tein HA height adjustable coil overs Shocks

Tein Adjustable Caster Rods

Cusco Adjustable front strut brace

Cusco Solid Rear strut brace

Cusco Master Cylinder brace

Nismo Front sway bar

Nismo rear sway bar

Enkei RS evolution wheels (approx 3000km on the tyres)

Greddy Pillar Pod

Apexi mechanical boost gauge

HKS Oil temp gauge

HKS Water temp gauge

Greddy Exhaust temp gauge

Momo Steering wheel

Factory ABS

image1.jpg

27692l.jpg

27695l.jpg

Dscf0335sm.jpg

Dscf0339sm.jpg

EDIT: More Pictures Added and more mods added.

Edited by ookami

na sorry, too much work involved in returning it to stock, the head has solid lifters and has been modified to take the bigger cams, so i would need another head.

And it would probably make me cry .... its an awesome car.

  • 4 weeks later...
Are u interested in sputting it back to stock and selling the parts?..

U might get more over all..

Shot gun for the turbo.... :D

Always cracks me up when i hear these kinda responses. No offence meant, but why would he spend so much time and money on it to pull it apart again and sell it off. Would cost more than he'd make.

Good luck with it dude, neat car. :O

  • 2 months later...

Bump - come on, is a really awesome street car and much higher power skylines can't keep up on the street including gtrs (except from a launch of course :) )....

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...