Jump to content
SAU Community

Recommended Posts

Hi all,

I'm helping to get hold of chicane officials for Taga West in September. Presently there is only 8 teams of officials and we need another 10 to be able to cover this event.

Chicanes are required to keep the stage average speed below 132km/h as required by CAMS and the FIA. WA does not have that many tight twisty roads (compared to Tassie for example) so we will need between 16 to 19 teams to set-up the required number of chicanes for the event, something like about 75 in total over the 4 days.

Each chicane team will be made up of 3 people, one is the senior post marshal SPM (you!), another is the bollard replacement marshal (BRM) and the last is a flag marshal. Unless you are keen to join up with another person that you know, already on this list, I would like you to think about getting a couple of your friends/family involved so you can be out there with good company and enjoy yourself at the same time.

The itinerary shows a few stages are repeated and a few others are spread out across the region, so if you have any preference to either stay in one place (with one set-up) and watch the cars pass you a few times, or travel around (set up, pack away, move, repeat) and see as many different stages as possible.

The details for training and events are as follows. Please note that training is not compolsory, so if you can't make both dates you can still be involved.

Training - AHG Driver Training Center, Grogan Road, Perth Airport

7th August (Sunday) - 11am

14th August (Sunday) - 11am

Chicane Team Meeting - Venue TBA

30th August (Tuesday) - 7:30pm

Targa West Event

8th September (Thursday) - 3:30pm to finish

9th September (Friday) - 7:30am to finish

10th September (Saturday) - 8:00am to finish

11th September (Sunday) - 8:00am to finish

Please contact Mitch Templar on 0418 959 023 or myself via PM to register your interest and he will email you the appropriate forms, itinerary, maps ect. Please get involved if you can.

Link to comment
https://www.sau.com.au/forums/topic/82971-targa-west-officials-required-asap/
Share on other sites

Hey Cam,

I'm already a part of one of those 8 chicane teams. You going down to AHG for the 7th? If so would be good to catch u there.

Good idea posting this up cause i think they are struggling to fill places.

Were you at the first meeting on 12th of July...Anyway will say high if I spot you. I'll be driving the line down there on Sunday.

Hi all again..

Just an update on this. I've just been to the first training and it looks like we should be very close to the action. If any of you can give up some time to support this event I'd urge you to give it a go.

Masahiro/Col - good to meet you guys. See you at the next meet. Shame I didn't get to check out your FD Col - I've had an unhealthy hankering for an FD for a while now..

Morlock - didn't meet you there - though hopefully will next time.

Cam

yeah nice to meet you colin and cam.. it was better than i expected cos i thought it would be all old euros but seems like there are enough japanese and domestic cars plus the porsche!

well see you guys this weekend and for those who are thinking about it do get involved cos the line up of cars are modern japanese, european and aussie muscle to satisfy any car enthusiast... didnt see any skyline though....

masahiro

Just had the training information for this Sunday. It's running from 11am till 12pm and we'll be hearing from the clerk of courses for Targa Tasmania. Come down and get involved if you can.

Cam

  • 3 weeks later...

Hi guys - just an update on Targa West - the official course cars are going to be skylines! Should be a great event with over 60 cars entered. Try to get out and support it if you can.

Update_9_02.09.05.pdf

Kicking this event of this afternoon. Formal opening is at Forrest Place in Perth tomorrow morning from 7am to 9am.

Check out the attached maps for stage details and go along and have a look if you can.

image_9080900_0001.pdf

yep just finished hartly estate today! buggered as anything....

and did wells glover yesterday... oh i was in the chicane team

took some pics but looks a bit blur...

will post them up once it gets uploaded on my computer...

yep just finished hartly estate today! buggered as anything....

and did wells glover yesterday... oh i was in the chicane team

took some pics but looks a bit blur...

will post them up once it gets uploaded on my computer...

Wells Glover !!

How fast was that stage !! ;):)

Lets just say the auto wrx camera car found the speed cut for quite a while..

Hehehe

Cheers

Ken

Ken - Wells Glover was one of my chicane stages. Standing on the outside of the corner at the 200m board is a silly thing to do, but the cars looked fantastic heading towards you at 180+!

And yea - it never happened. I'm not a good judge of speed and we definitely didn't watch from the outside of any corners.. :)

yep just finished hartly estate today! buggered as anything....

and did wells glover yesterday... oh i was in the chicane team

took some pics but looks a bit blur...

will post them up once it gets uploaded on my computer...

dont tell me you where parked next to a wine red nissan patrol? at the 5km mark, or rather 3.5km?

imports101 sticker on your quater window?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
    • OK, so regardless of whether you did Step 1 - Spill Step 2 - Trans pan removal Step 3 - TCM removal we are on to the clean and refill. First, have a good look at the oil pan. While you might see dirty oil and some carbony build up (I did), what you don't want to see is any metal particles on the magnets, or sparkles in the oil (thankfully not). Give it all a good clean, particularly the magnets, and put the new gasket on if you have one (or, just cross your fingers) Replacement of the Valve body (if you removed it) is the "reverse of assembly". Thread the electrical socket back up through the trans case, hold the valve body up and put in the bolts you removed, with the correct lengths in the correct locations Torque for the bolts in 8Nm only so I hope you have that torque wrench handy (it feels really loose). Plug the output speed sensor back in and clip the wiring into the 2 clips, replace the spring clip on the TCM socket and plug it back into the car loom. For the pan, the workshop manual states the following order: Again, the torque is 8Nm only.
×
×
  • Create New...