Jump to content
SAU Community

Recommended Posts

All parts are from my 32GTR. Selling due to upgrade.

Motor has been stripped, some parts from that are for sale now also,

* Standard Rods - $150

* Standard Cams - $150/pair

* Standard Oil Pump - $100

* Standard Harmonic Balancer - $50

* Standard Cam Wheels - $50 pair

* N1 Water Pump - $200***SOLD***

* Nismo Timing Belt, done bout 15,000kms gc - $30

* Sard Fuel Pressure Reg, Excellent street upgrade - $200

* Standard gtst drivers seat - needs recovering $30

* Momo steering wheel $150

* Standard 32 GTR ecu $200

* 1x Standard GTR Turbo with all fittings, great condition $400

* 1x Standard GTR Turbo, blown, no exhaust wheel $50

* Standard dump pipes $20

* Standard exhaust manifolds $50

* Rego Plates - OOR032, as seen in pic below $400 will upgrade to sell....

* HKS FCON computer. Has harness to plug into factory computer and factory loom. Full piggy back with no hard wiring in.

From what i've been told if your in Brisbane, Matt Spry from PITS on the Gold Coast can tune these, and if in Sydney, i would assume BD4's should be able to tune it seeing as they are the HKS distributor.

Pics of this to be posted shortly. $500

I need to sell parts a.s.a.p so all prices are negotiable. Located in Brisbane. Shipping at buyers expense and I will arrange for buyers. Pics to come shortly or as required. PM me if needed.

Cheers

Mike

post-22000-1124005058.jpg

post-22000-1127529293.jpg

post-22000-1137894856.jpg

Edited by dahandfull
Link to comment
https://www.sau.com.au/forums/topic/83188-gtr-parts/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

Tbee - not selling the standard in dash speedo cluster.

dd4321 - Yes the one thats din mounted. And yes it will fit gtst. What is displays is Boost, oil temp and battery volts....

Chrisman - from memory it doesn't. the only tag i remember is a seriel number, but i'll check tomorrow for you

Link to comment
https://www.sau.com.au/forums/topic/83188-gtr-parts/#findComment-1515754
Share on other sites

Injectors, harness, gauge cluster all sold.......

Zenith - i would like to sell the whole lot together because I have no use for any of the standard passenger seating (cage and race seats fitted).....

Link to comment
https://www.sau.com.au/forums/topic/83188-gtr-parts/#findComment-1518727
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...