Jump to content
SAU Community

Recommended Posts

hi there guys and gals i've got a question on R32 gtr injectors. what RWKW are these injectors good for, i was told 300RWKW is this true if no can somebody plz tell me a tru figure. thankz

OK - I have an R32 GTR pulling 297awkw with sthe td injectors

I have a PFC with R34 N1s, pods, exhaust (yadda yadda) but still use the std AFMs.

With my current set up that is the limit - I get 100% duty cycle from time to time under full load - so I know they can't take much more

HtH

OK - I have an R32 GTR pulling 297awkw with sthe td injectors

I have a PFC with R34 N1s, pods, exhaust (yadda yadda) but still use the std AFMs.

With my current set up that is the limit - I get 100% duty cycle from time to time under full load - so I know they can't take much more

HtH

Are you sure you're not from W.A? :D

Are you sure you're not from W.A? :)

you guys get over the whole "must have been in WA thing" as a whole state shouldn't have to pay for a few peoples sins

std injectors good for around 400rwhp or 300rwkw but that is maxing them out and not advisable if you want reliability (700cc sard injectors are cheap and run beautifully with pfc)

pete

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...