Jump to content
SAU Community

Recommended Posts

Ladies/Gents,

I'm going to be pulling my car back to stock, and selling it as such (not much interest in a very modified car these days).

As such, I'll be selling the bits and pieces in my car (and will potentially look at stock parts as a part trade!).

Seeing as there's a lot of interest on this forum for building up a tough RB25/30 package, I thought I'd offer you all a chance to buy a complete package...

The motor has been built and tuned at Racepace motorsport, and produces a very reliable 320rwkw on pump gas @ 16psi racepace (352kw on Autosalon dyno).

It's pretty much a drop in replacement for your existing motor, and saves you the trouble of having your car off the road for a few months whilst you're having an engine built up (at a much higher cost!).

Firstly -

The Motor has been built and tuned at Racepace motorsport, and produces a very reliable 320rwkw on pump gas @ 16psi racepace (352kw on Autosalon dyno).

It's pretty much a drop in replacement for your existing motor, and saves you the trouble of having your car off the road for a few months whilst you're having an engine built up (at a much higher cost!).

Package includes:

Engine

Top End

- RB25DET i6 24valve twin cam head (freshly rebuilt)

- Skyline GTR Cams

- Skyline GTR Valve springs

- Modified oiling system restricting flow to the head.

- Tomei 1.2mm metal head gasket

Bottom End

- RB30 3.0 litre turbo bottom end

- JE Forged Pistons (Dished) - HPC Coated

- Shot peened, crack tested, and strengthened rods

- Balanced & machined crank

- Blueprinted & balanced during assembly

- GTR Oil & Water pump

- Tomei Rod Bolts

- enlarged baffled Sump

Turbo, ECU & Fuel

- Trust Hybrid Turbo (T04R front wheel, back cut t66 rear, 360deg thrust bearing)

- Trust 45mm External WasteGate

- Trust Custom Tubular Exhaust Manifold

- Apexi PowerFC ECU + Hand Controller

- 16psi boost.

- Z32 300zx Air Flow Meter

- Aftermarket Jap 550cc Injectors (unknown brand)

Ancilleries

- 3" high flow cat, and a 3 1/2" trust system up to the turbo

- External 45mm Seperate pipe on the Wastegate into the exhaust just before the cat.

- Oil/Air Seperator with return line to the sump.

So pretty much everything you need to turn a stockish car into a weapon.

I'm accepting offers around the 14k mark (street value for this to do yourself would be closer to 25-30k).

As I have to replace this motor with a stocker, I'll accept a stock motor/turbo/etc as part payment if the motor is in good condition - in which case, you can have it for $11800ono. SOLD

Anyone who has built an RB25/30 will tell you of the troubles they have fixing finiky problems during the build process. With this, you save yourself all that trouble, and get a complete "drop in" working package.

I can provide a dyno run for anyone interested, and am happy to show the motor running (as it's currently in my car). This motor makes more power than a stock R33 at 3000rpm, by 4000 rpm makes in excess of 200rwkw, and has in excess of 300rwkw for about 2500rpm - so is an extremely tractable motor.

Redline is 7500rpm and makes good power right up till it hits the limiter.

Other Parts

R33 GTR Seats. These are in perfect condition. $850ono. SOLD

Cusco 4.11 LSD Perfect upgrade for a car making good power - this is very responsive, and puts the power down well$800ono. or $700 with swap for standard.

Whiteline Suspension Package Includes Bilstein Shocks & Whiteline Progressive Rate Springs$700ono. Note LEGAL HEIGHT!. SOLD

Blitz 4" front mount intercooler including all piping required to mount up to factory plenum. $1000ono or $900 plus factory intercooler + piping.

17" Lightweight Jim Head Racing rims (17x8 front, 17x9 rear) including tyres 255 rear/235 front - Falken Azenis ST115). These are in good nick but have scratches on some of the rims $1100ono or $950 with swap for factory 16" rims/tyres (if in good condition).

R33 GTR 4 Piston Brembo Calipers/Rotors (front) with EBC Greenstuff Pads Plenty of meat left on the pads & rotors.. $1650ono. or $1300 plus swap for factory brakes.

Apexi AVC-R Boost Controller In near perfect condition. $600ono.

Note that these parts are all on the car, so they will be taken off the car once purchased.

Any questions - let me know. I might be willing to separate the motor if there is enough interest.

Cheers,

matt

Edited by matlowth

LSD Age/Condtion - Not sure - came with the car, but condition is fine AFAIK without taking it off the car.

Munna - Replied!

matt

LSD age / condition ?

  • 1 month later...

Seats are for sale again as buyer has dissappeared.

Anyone interested can have the brembo's for $1300 swap with the factory rotors...

matt

Scooby - You have mail.

FYI - The seats include rails. They're a straight swap for the factory seats, and can be taken in/out with just a couple of bolts.

matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...