Jump to content
SAU Community

Recommended Posts

Quick report -

so far done about 220kms, used about 35 litres of the stuff! Shitehouse economy! Maybe the oxygen sensor for the ECU can't tell its got 10% more ethanol in it, much the same of the dyno's...... so its adding a extra 10% to light load cruise?

Knock levels about the same

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

The O2 sensor doesnt know that you've got ethanol in it, but it will detect the leaner mixture and the ECU should compensate somewhat.

Ethanol has a lower calorific value than petrol, so basically the SAFF stuff (or any other ethanol mixed fuel) has less 'bang' or energy for the same amount of petrol. Thats why your economy is suffering, and is one of the major downfalls of ethanol mixed fuels. Usually the economy drop is roughly 2-3% in most cars for a 10% blend. If you're suffering much more than that, then something is wrong...

So IMO the bottom line is that you're not really saving money on ethanol fuels, unless its able to at least compensate on the pump price with respect to the fuel economy loss. That means roughly 5c/L cheaper. I'd have no problems using it in your average 10 year old car I guess, but I dont see the point using it in our cars.

Edited by Busky2k

that's what I thought too busky

Your car will only use more fuel in closed loop ie cruise/constant speed where the ecu detects leaner condition and add extra fuel. In open loop it won't know which fuel is in there.

The added avantage of this fuel is better knock retardation. So you can run more boost/timing safer. If you want more power you wil have to fill up more frequently :D It's part of the game unfortunately.

Well over all, I got 370kms out of a tank. The last hundred odd kms was just off boost driving around really.

Economy wise it went pretty close to what I usually get out of a tank of BP/Mobil, maybe 30kms less

I'd say overall, its not any better in regards to performance, knock levels where pertty similar.

I guess the jury is still out, need to do a bakc to back dyno to see if its any better

But, from what I experienced, if you where stuck, and needed to fill up, it would do the job pretty well

Hmmm. The only issue I have in terms of 'knock retardation' etc is that if the petrol is rated at 98 RON, is it tested including the ethanol? If 2 fuels are 98 RON rated, and one is ethanol blend, then neither should have advantage over the other.

SAFF would theoretically allow MORE timing if they start with a 98 RON base and add ethanol, rather than a 96 RON base and then adding the ethanol to make up to 98 RON. (Ethanol has an octane rating of ~110) Might be worth firing off an email to SAFF to see which option they take to make their 98 stuff.

Edited by Busky2k

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Is it alright to top up with just another green coolant?
×
×
  • Create New...