Jump to content
SAU Community

Recommended Posts

Item:

1993 R32 GTR - Silver

Location:

Brisbane, QLD

Item Condition:

Buyer Dependant, Hail damage on bonnet.

Reason for Selling:

Purchasing a house

Price and Payment Conditions:

$25000~$29000 Depending on options. (Bonnet, Rims etc)

Extra Info:

Have clocked up 100000ks so timing belt will be changed prior to sale.

The bonnet is damaged after our last bout of hail storms so it's the very limited "golf ball spec" edition. Think of the dints as "speed holes"

CES Front pipes with 3" cat back. Will be sold with stock exhaust also.

Lowered Springs with standard GTR shocks.

Currently on 17" Inch tri-spokes, may be able to arrange standard rims.

The clutch is a Nismo GMAX III Triple Plate. Not for the weak legged.

Gearbox has a straight cut gearset, may be a little noisy for some.

Walbro Fuel Pump.

Front and Rear strut bars.

HKS Panel filter in modified factory airbox.

Old-style SAFC, may be removed before sale.

Standard ECU, Turbos, Injectors, Dump Pipes.

Ran 12.4 at Jamboree 2004 and 208.3kw at all fours.

This is not an '89 model, I paid $34000 18months ago for a clean, stock, late R32 and as such this car is in great condition with exception to the bonnet and clutch cylinder.

I am flexible on price but this is not a desperate sale.

May consider offers of trade + cash.

Contact Details:

Just send me a PM

post-24-1124842628.jpg

Link to comment
https://www.sau.com.au/forums/topic/85137-late-1993-r32-gtr/
Share on other sites

Another free bump, I have driven this car and been out as a passernger in it and can vouch for its absoluted kick-assyness :D Yes it is a word, I just made it up so naahh!

  • 2 months later...
  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...