Jump to content
SAU Community

Recommended Posts

These are installed in the boot.

Remove the partition between boot cavity and battery.

Look on both sides under the parcel tray and you will see 2 rubber boots on each side.

Remove the rubber boots and you'll see some fixed threaded bolts.

These are the mounting points for your strut bar.

They dont look like it but they are.

You'll need some nuts aswell.

:O

These are installed in the boot.

Remove the partition between boot cavity and battery.

Look on both sides under the parcel tray and you will see 2 rubber boots on each side.

Remove the rubber boots and you'll see some fixed threaded bolts.

These are the mounting points for your strut bar.

They dont look like it but they are.

You'll need some nuts aswell.

:)

Hey

Actually this is incorrect on my R33 i had to actually remove the rear parcel shelf from inside the car to get axcess to the rear struts. Their is no way you can get to them from in the boot. R32 YES R33 NO.

Edited by the97skyline

I thought the same with my R33 but there are 2 bolts on each side in the boot cavity.

They are covereed over with a rubber "L" shaped sock.

Ive got a series 1 but I dont think they are different with the series 2?

Have you installed it yet?

I thought the same with my R33 but there are 2 bolts on each side in the boot cavity.

They are covereed over with a rubber "L" shaped sock.

Ive got a series 1 but I dont think they are different with the series 2?

Have you installed it yet?

hahahaah Dam man, SORRY your right. No shit i though they were part of the car didn't know that you could remove them.

Thanks bro

Haha! Its all good. I said exactly the same thing.

Have you worked out a way to keep the partition?

Are you gonna cut it or just leave it off?

:D

Hey man I installed it today, keeping the partition. Not the best but ok i guess. hahah

Edited by the97skyline
Haha! Its all good. I said exactly the same thing.

Have you worked out a way to keep the partition?

Are you gonna cut it or just leave it off?

:D

post-9844-1125211194.jpg

Edited by the97skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...