Jump to content
SAU Community

Recommended Posts

$70 for 400-450 kms fuel, rego, insurance, services etc etc

plus the inevitability that you will modify it :D

i reckon if you can put $200 away a week go for it (unless you dont want insurance then less)

but be prepared to spend $500 on tyres when you fry them or $600 for a new clucth when you rape it :D

ahhh but who cares bout the money just buy one and mortgage your (or your parents) house for it lol

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1554900
Share on other sites

I'm getting about 400k's out of a tank when I fill up, but i'm only filling up to 50 litres for full. IE: i'm getting about 400k's per 50 litres.

I read a lot of threads about running costs and fuel costs etc for skylines before I got mine, and my advice to you is to wait around for the right car, its doesn't have to be pretty but look for a healthy engine, and not too many mods if you're worried about your fuel use.

BTW, I own an 93 R33 man GTS-T with cat back exhaust, pod and Bov, so nothing too special.

Having said that, buy a skyline and you'll wonder how you ever drove anything else, they're worth every penny.

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1555315
Share on other sites

So far this year ive spent:

Insurance $1000

Rego $500

Tyres $800

Front Brake Discs $600

Clutch $600

Fuel $60 a week (1 tank)

Fix gearbox leak: $150

Oil and oil filters $200

Mods: $500

And thats with nothing going wrong (except clutch wearing out from old age) and no optional extras (except the mods.)

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1555675
Share on other sites

hhmmmm let me see...since i bought it 4 weeks and 7 days ago, my gtr has cost me...

car $26k

new rotors & pads all round $1500

new clutch $1500

upcoming costs in next 4 weeks

registration transfer fee $1000

alarm $1000

insurance $3000

new coilovers $2000

+ mods $infinity

so all up $26k + $10k

=$36k

wow i didnt even realise it was costing that much

and ive only actually had the car for 1 day before it went into the shop!

this sux!!!

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1557070
Share on other sites

If you want decent sedan preformance 9 times out of 10 it's gona cost you more in petrol, but ask everyone here if it's worth it and they'l say yes.

Obviously it's going to cost you less for a NA skyline, as someone said before it's cost him about $55-$60 for 400kms..

Cheers,

Rhys

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1559242
Share on other sites

i know this is off topic but i just payed $1.37 a litre for fuel ...

it chewed over $50 from a quater before it was full grrr !!!

^^ mayb the line might be relocated to weekend driving or mayb not ... (hehe)

dont mind me im just rambling =)

bye now

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1560589
Share on other sites

sure you might get $60 for 400kms on a NA. but for an extra $20/tank in a turbo you can do those 400kms so much faster! :D

:lol: so true.

in the end..... its still worth it, if you really love the car, you dont care how much you spend on it. the end.

Link to comment
https://www.sau.com.au/forums/topic/85906-running-costs/#findComment-1561815
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...