Jump to content
SAU Community

Recommended Posts

Hey, basically my car was (safe) tuned and dynoed on 14psi with the stock rb20det turbo... mods are as follows : 600x300x76 PWR FMIC, microtech ltx-8, custom plenium,bov etc..

Car is currently running at 12psi just to be REALLY safe but I can smell the fuel!! too rich!!

Now, would it be safe to run at 15/16psi, Say if I ran 1.1 bar, would that lean out?? I know it's kind of hard to tell, but would an extra 1 pound or so be detrimental??

I dont really give a crap if my exhaust wheel goes by by, excuse for a new turbo..

I'd much rather that happen than my engine leaning out and going bang

It's definately running rich though

Would  you really want to risk it for just 1 or 2 psi? Go get it checked out I say. And the fuel smell you're getting can be leaks in fuel lines or a faulty fuel regulator.

14psi certainly wouldnt be a risk, as it was tuned at 14psi, and safely as well..

so i'm asking if 1 or 1.1 bar would be silly

i'm sure 3-4 psi would make a noticable difference, and if the fuel is there, i might as well use it

I dont really give a crap if my exhaust wheel goes by by, excuse for a new turbo...

Go talk to GTRGeoff and RowdyR32, they've both had turbo's let go and shoot ceramic in to the ENGINE, you don't always end up with it just in you cat. Running ceramic turbine wheels to destructin is NOT a risk free exercise.

Also by 1 bar you're already past efficiency on a stock RB20 turbo, it's heating the air WAY too much to be a good idea, stick to ~12psi (spiking to 14psi odd) until you get a better turbo.

My 2c.

it's the exhaust gas temp kill the ceramic wheel, that's about tuning, it will make a different with good tune

i will say running 1 bar is fine as long as the tune is good.

run rich will make it cooler, which is good, keep it rich but throw in more timing ;)

lean it up will only cause yr turbo blow easier

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...