Jump to content
SAU Community

To Dump Or Not To Dump

Bobjones

By Bobjones,
in Engines & Forced Induction

 Share

Recommended Posts

Bobjones Mentor

Bobjones

Posted
  • Author
Posted

Zyomtic, I will see what they can make up for me, I have a LARGE, read HUGE rear muffler only at the moment (and cat obviously) made by 5Zigen. The exhaust is quiet and not droney at all, before I tried a different muffler and it drone like a MOFO.

Its the rear muff that makes the difference so I will see what a split dump will do...

someonestolecc Grand Master

someonestolecc

Posted
Posted
Go CES dude....i recently ordered one for my s15.

To make a long story short....the CES unit has been bread with quality and performance in mind and has proven dyno results...just search the many forums on the net and u will see what i mean.

If your like me, i like to do the job once and do it right....thats why i went for the CES unit, i don't see any point in stuffing around with the cheaper copies....waste of money in my opinion.

I must say the CES unit is still quite expensive but hey, that is the price you pay for performance!

Marketing people have a term for that, it's called conspicious consumerism.

I'd go the BOS one. BATMBL is a great guy to deal with and the dumppipes he supplies look as if they are from good design (seperate runner atleast 40mm from wastegate). I haven't got one purely for the reason I have a sr20 in a cefiro and that's not exactly an off the shelf part.

Bobjones Mentor

Bobjones

Posted
  • Author
Posted

I agree with that...

My cat back to rear muffler (I wanted to remove the jap section that included a middle muffler as it was too quiet), including flange joints, gasket bolt etc, all madrel bent mild steel cost me the huge sum of $80...

Atleast the BOS one has the O2 sensor hole on the top...and the welds look alright too...

SpecRPlaya Apprentice

SpecRPlaya

Posted
Posted (edited)

the BOS copy....is just that...a copy!

does not deliver anywhere near the performance and durability of the CES system...sorry. The weld's and tapering of the pipe are no where near as smooth as the CES product, BOS also lacks the other hidden extra's that come with CES D/T which i will leave you to do your research on.

Anywayz dude....it's ur decision in the end!

Edited by SpecRPlaya
Bobjones Mentor

Bobjones

Posted
  • Author
Posted

If they are hidden then how is anyone to find out.

The welds look fine, yes the taper on the BOS is sharper and thus in theory at least not as flow orientated.

I started this thread to GET information so please share it with everyone. You have bought the CES one and yes I agree that the quality is better otherwise you would never sell a product for that price.

The 02 sensor however does need to be above horizontal to work, that is fact. I am considering a custom one is mild steel, as I know the people I should be able to get it done relatively cheaply.

I also want the wastegate pipe to go in line with the main pipe and enter the main pipe at the front of the bend at the bottom, if you know what I mean...

INASNT Grand Master

INASNT

Posted
Posted
the BOS copy....is just that...a copy!

does not deliver anywhere near the performance and durability of the CES system...sorry. The weld's and tapering of the pipe are no where near as smooth as the CES product, BOS also lacks the other hidden extra's that come with CES D/T which i will leave you to do your research on.

Anywayz dude....it's ur decision in the end!

And that would effect the power output of the stock turbo by how many poofteenth's??

zymotic Experienced

zymotic

Posted
Posted (edited)

oh, we're up to page 2! Guess it must be friday arvo :)

pretty amazing figure on the S15 eh!

droney it was, because it didn't include a resonator

loud yes but I have read on here that resonators don't

counteract loud nearly as much as droney.

Bottomline - its worth paying extra $100 or wateva to get

one installed

Another thing to avoid is cannons, just get a standard high

flo muffler - as long as it flows 3 inches i guess + cannons

are gay.

please let me know the results of your enquiries to Beedhams

about there dumps Bob/Neill cos if they are good I might go

there also, don't suppose I could mention your name to Bobby

and get a discount?

Edited by zymotic
Bobjones Mentor

Bobjones

Posted
  • Author
Posted
not telling! :(

thats not nice <_<

Mention my name to Bobby, he probably would not remember me until I turn up...he is not the best with names...but never forgets a face!!!

Its also good that a very good mate send him alot of work, damn Redcliffe, its like another society.

I will see what Bobby can come up with, it will be after Jambo as I have other work to finish on others cars before then...

  • 3 weeks later...
Bobjones Mentor

Bobjones

Posted
  • Author
Posted

Have not go around to it yet...just bought another car to get around so that I can progress a few things on this and the house...

Also waiting to see what changes there are to the BOS Importing one regarding the position of the 02 sensor

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...