Jump to content
SAU Community

Recommended Posts

The actual bulb part can be bought from dick smiths. I bought some instore and some from their online store. I bought twice because I didn't realise how orange they'd look without the blue caps.

Suffice to say, i'm looking for the blue caps now.

  • Replies 78
  • Created
  • Last Reply

Top Posters In This Topic

so the actual bulbs are orange? do they turn white with the blue caps on? the original is clear so does that make a difference? been to 2 dick smith stores and they dont have any. know the part no.?

Read this thread, i'm sure I posted it in here somewhere?

And yeah, it lights up a really bright orange. I thought it'd be like a ceiling globe, but it's not.

With the blue caps? I don't know. I've never seen it. I removed the caps to change my dead globes, but they were melted on and ripped without any real effort.

This is why i'm hunting for the blue silicone globe caps. I replaced the light in the hazzard button, and it had a tiny blue cap on it, but it lights up a really nice white. I'm hoping that's the deal with the AC unit too.

I'll keep you posted here, cause I should be receiving a whole AC unit to stuff around with.

  • 4 weeks later...

found the perfect globe and only 70 cents from repco, or can get from auto elec...

part no 47702 dash globe

pic shows exact same size, removed second blue cap perfectly with a 'precise screwdriver' smallest flathead in the pack, angled down on globe and slowly slide up to top, few mm each time turning around after each time.

fixed hazard light also with a grain of wheat globe as same size also. much harder to fix tho

pic of globes all fixed aswell

post-23924-1157350768.jpg

post-23924-1157350948.jpg

Yeah, those are the "grain of wheat" globes that you can get from Dick Smiths.

Looks like someone's been into your A/C unit with them too... The right-hand side is what mine used to look like without the blue caps on them.

My hazard button turned out a lot whiter than that...

found the perfect globe and only 70 cents from repco, or can get from auto elec...

part no 47702 dash globe

Nice one Brad,looks like someone finally got lucky with these bulbs!

70c is what i was hoping for!

So repco is where you got them from??Hopefully the sydney stores will also carry these-im gonna call them now.

Just hoping they are the same size on the 32 as the 33.Im sure they wouldnt have gotten THAT much bigger!!

Yeah, those are the "grain of wheat" globes that you can get from Dick Smiths.

Looks like someone's been into your A/C unit with them too...

This is NOT TRUE.Crappy dick smith does NOT stock this size bulb as has been discussed in this forum countless times before.Their catalogue is wrong.Anyway,I dont even know why people still shop there as its a total rip since they were taken over by woolies. ;)

This is NOT TRUE.Crappy dick smith does NOT stock this size bulb as has been discussed in this forum countless times before.Their catalogue is wrong.Anyway,I dont even know why people still shop there as its a total rip since they were taken over by woolies.

Not true? I ordered three and got three. Exactly the same size, same length legs, same voltage and wattage. Identical to the dead ones I pulled out.

Since you're so sure of yourself, and because i'm such a blatant liar, i'll stop telling people to go get these globes. =-[

http://dseau.resultspage.com/search.php?p=...amp;isort=score

cookie--monster

i found that the bulbs from dick smiths were too small but right size for the hazard light 'grain of wheat' bulbs. Can get the dash globes from auto elec probably for same price instead of waiting. Measure your bulbs from your current A/C should be 4mm wide and about 8mm high i think. You have the blue caps on the old ones? you get them off alright?

So did you use the same ones for the A/C unit, Brad? I did.. they were identical.

I used smaller ones for the hazard and demister buttons. The smaller ones I got from JayCar, and had yellow pigtails on them. That was the size of the original ones when I pulled them out, so i'm pretty sure i'm correct with the sizes?

yep thats right, the grain of wheat ones with the yellow pigtails i got from dick smiths tho, same thing just different price im gathering, found that the wheat globe cost more than the dash globe. Just an easier way of getting A/C globe thatn ordering from dick smiths online.

nah the ones i got from dick smiths were the grain of wheat globes which i put into my hazard light as tiny. The globes for the A/C light was from repco, this is for a r33 tho i dunno if same globes in 32 or 34s

Not sure how links work here but I found a post of a while ago about how to replace the "grain of wheat" bulbs in the aircon unit.

Hopefully it is shown below. If not, you could always try search.

I read the thread linked by midnight. Have just replaced the bulbs with the "grain of wheat ones from Dick Smith.

Cost was $2.50 for a pair.

1. Take the control unit out

2. Undo the two bulbs with a quarter turn

3. Unwrap the thin wire holding the bulb to the holder that makes the actual "contact"

4. Carefully push a toothpick under the blue condom and roll it around the bulb to separate the rubber from the bulb.

5. Reverse order for new bulbs.

Simple. (Although on the one pictured I left a tiny bit of the blue rubber on the old bulb. I managed to get it off completely intact with the other one.)

Look closely and you can see the wire wrapped around the base of the holder. (This is the replacement globe in place)

Enjoy!

El Bee

Yeppers, I think I was in that post somewhere.

I'm quite quite certain that the "grain of wheat" are the slightly larger globes used in the A/C unit. They have a solid bare wire.

The smaller yellow pigtail globes are for hazard/demister. You have to strip the yellow shielding off, and the wires are stranded.

I have done both, and i'm very sure this is correct. I have just received another second hand A/C unit, all original, with working bulbs and globe caps. They are exactly the same size as the grain of wheat. I suspect that cookie-monster got the wrong globes from Dick Smiths when he asked for "grain of wheat", because the ones I got were the same as the online catalog picture, and identical to what came out of my (unopened) A/C unit.

R33 series 1 and 2 should be the same.

when i asked for grain of wheat globes they gave me the yellow pigtail wire tiny ones at dick smiths, so depends on who you ask i guess, besides the globes i bought were 70c so better than 2.50 for a pair, hardest part is to get the blue cap off. im sure there is enough help here for anyone needing to do it.

Ah right.. if you look on dse.com.au and search for "wheat", it comes up with the correct globe.

So it's a case of mistaken identity when you went in and asked for them.

So the answer still stands. Grain of wheat for A/C, 12v yellow pigtail for hazard/demister.

so the actual bulbs are orange? do they turn white with the blue caps on? the original is clear so does that make a difference? been to 2 dick smith stores and they dont have any. know the part no.?

Brad, you know the answer to this now, but i'll mention it for everyone else...

The blue silicone cap (stock) takes the orange glow out of the globe, and makes it a VERY light blue.. almost dead white.

When I did the hazard and demister, the demister now lights up a really nice white.

I'm doing up a proper guide for the DIY area with a spare A/C unit I picked up. Complete with what it looks like with and without the cap, how it looks with LED, and whatever other combo's I can think of.

EDIT: I'm also looking into whether the grain of wheat globes come in different wattages, and what the stock ones are roughly rated at. There is no writing on the stock globe.

Edited by RANDY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...