Jump to content
SAU Community

R33,people,give Me Some Idea.

vcool

By vcool,
in New South Wales

 Share

Recommended Posts

ranicx Veteran

ranicx

Posted
Posted

yeh like sl!m said.. check for rust under it and under where the spare wheel (space saver in the boot) is.. i think there the main places. oh near where the front bonet hinge is and where the front roof piller meet, check all around there. saw one car and it had rust there.. not good. oh and if the window seals are coming up on the edges at the bottom of the front window, that happens when every skyline ive seen.

theres quite a few things to look for, but theres a few to get ya started :)

Sl!m Grand Master

Sl!m

Posted
Posted

If the car has aftermarket suspension, and looks low. check under the car make sure they havent bottomed out, and damaged somthing underneath.

trying to think of what else is easier to check, I've never shopped for a 33 so dont know what normal probs they have :lol:

sindows Veteran

sindows

Posted
Posted

Take a look at my GTS for sale on carsales...

Its white R33 GTS for $13k with heeps of extras and nothing to spend, im a SAU member and i have looked after my car as much as most people in the club!

Cheers,

Mitch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...