Boost Prob

[dr_sulu]

hey all i recently installed t3 on my rb20 sil and i have a dual stage boost controller and was told i can run it at 14psi until i get my injectors and tuneig done,and no mater how much i wind it up its not going ova 8psi, i replaced the boost controller but its still the same, what wrong ????????????

[1400r]

make sure your still running the factory black hoses of the actuator

Edited September 17, 2005 by 1400r

[Andi]

I'd say you've got it plumbed in wrong. Internally gates yes?

Make sure you've got the boost controller setup properly, as in the plumbig in the engine bay. Seems like you've got all the air from the intake source going towards wastegate actuator thus making it boost at its lowest possible setting.

[TTT]

try running it with no boost controler and see what boost you get.

just stick the hose from the wastegate straight in to the turbo with no controller.

that way the wastegate spring should control the boost pressure.

should be about 8-10 psi I guess..

then install the boost controller as suggested.