Jump to content
SAU Community

Recommended Posts

hi people

ive got a idle problem with my R32 GTS-T it seems that it will got from 1k to 1500rpm and stay there and not come down. i have seen a thread long time ago here how to fix it, i removed the ACC value and the back of the intake manifold and cleaned it out, and tried to adjust it but no good still. so i try to adjust the throttle Position sensor, i backed it off all the way to the left and still idleing at 1.5rpm.

could my acc value be f**ked? what do u guys think would be worng and how can i fix it without take it 2 a guy who will rip me off.

cheers

bill

Link to comment
https://www.sau.com.au/forums/topic/88140-idle-control-problem/
Share on other sites

Its your TPS. Its not registering closed throttle(to much voltage). Bring your temperature up to above 80deg - check your timing and then reset the position of the TPS so you get the disired idle. Their is two 8mm bolts on the TPS loosen them and twist the TPS the oppisite direction to what the throttle blade shaft moves.

As well as the AAC there is another idle controller on the rb20det. Its located under the throttle body and under the fuel rail from memory...its job is to lower the idle when the car warms up also...there was a thread in the maintenance section a while ago about it....

http://www.skylinesaustralia.com/forums/in...51&hl=regulator

Edited by Bl4cK32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 馃檹 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 馃槈. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 馃槏 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
    • All my Polish car culture insight comes from watching Nightride. So I half expect this to get 1UZ swapped eventually?! Are you going to drive it in winter? I'm always curious how ATTESA would hold up in the snow. There isn't that much opportunity to try it in Australia.  
    • My steering lock unit on my Infiniti G37 has failed. The car is a local 2012 Infiniti G37 (Q60 ) I need to replace the unit My local mechanic said i need to buy a complete steering wheel assembly. Does anybody no any mechanics in Gold Coast or Brisbane who can fix this issue or where i can buy just the Steering lock control unit. Thanks
  • Create New...