Jump to content
SAU Community

Recommended Posts

I can offer AP Engineering Power FC to suit R32 GTST

Price is as follows:

with commander $1380

without commander $1040

that includes delievery and comes with 12 month factory warranty. And Ap Engineering Key ring :D

Turn around time for these will vary depending on numbers as there are already some in Australia and others on there way.

This will close on 09/10/05

money due by 11/10/05

Any Queries PM me.

Cheers B

post-17838-1127789520.jpg

Edited by grandmasterb
Link to comment
https://www.sau.com.au/forums/topic/89062-r32-ap-engineering-power-fc/
Share on other sites

How many people you need to get to do this group buy?

JSL there is not really a set number of people needed for this as these are all day everyday prices that i can offer (and im not making any money on it :O ) therefore i just get as many as required.

I already have 5 people that are interested as well as 2 for myself.

Any questions at all PM me and i'll answer them for you :)

Cheers B

there are 4 units left in the stock that is here available and they wont last long.

So far i have placed 16 through for order so be fast for the CHEAPEST AP Engineered Power FC's out there.

Cheers B

hey dude

anymore powerfc's??

im keen to get one for my r32 gts-t

cheers

All 25 units have been sold in this order.

I am waiting on more so will let you know ASAP about a time Giffo :angry:

Cheers B

I thought you where gonna do better prices than me!! :angry:

Its all good, still the cheapest AP PFC around.

Good luck Ben :P

Yeah i got it down even more as i placed 25 through for order and i dont make any money off them like other sellers so i can cut costs even more now.

But wont be running anymore on SAU as i dont have enough time :(

Cheers B

  • 1 month later...
any chance that there's some of these lying around for this price?

Yeah im interested too, Pm with details please B

Mick

PM sent fella's.

Cheers B

Can you PM me some info as well plz?

Cheers,

Matt

im interested in one of these

can i get sum info pm'd my way too

thanx

Ok guys all PM's sent with info.

If anyone else is interested please PM me for details.

Cheers B

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...