Jump to content
SAU Community

Recommended Posts

Excelleant, good info, how old is " the older soundstreams"?  Is my 6 year old one old or new?

:D cheers: )

If the amp is blue, then it's "older" :) The newer ones are all sorts of colours and for the most part have cast critters on them like spiders or what have you.

The older blue ones were incredibly over-engineered, I have a Reference 300 two channel unit "officially" rated at 37.5W per channel ... but can be bridged to 1/2 Ohm at about 300W:)

The reason the new ones aren't as good? The company went bust and I don't think the new owner of the name doesn't make them in the USA any more.

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

If the amp is blue, then it's "older" :D  The newer ones are all sorts of colours and for the most part have cast critters on them like spiders or what have you.

The older blue ones were incredibly over-engineered, I have a Reference 300 two channel unit "officially" rated at 37.5W per channel ... but can be bridged to 1/2 Ohm at about 300W:)

The reason the new ones aren't as good?  The company went bust and I don't think the new owner of the name doesn't make them in the USA any more.

Oh goody, mine is a blue one. Thanks for the background.

:) cheers :)

Oh goody, mine is a blue one.  Thanks for the background.

;) cheers :)

Hey SK, I thought you were a 'colour conscious' sought of guy - but a blue amp and 'peach' wiring on the SITC. A bit of a colour clash.

By the way 'off topic' received my SITC from ALEXCRIM today.

Marc2

  • 11 months later...

a sub will NOT fit under the drivers seat mate. NO WAY.

Ive got my amp under the passenger seat, all fine. Just have to block up the stock vent in there with some tape over it.

Easy to run wires too as the carpets already got a hole in it for the vent.

Only issue i dont like is that rear passengers feet can hit the amp, but I always warn people anyway.

yes i meant amp not sub under the seat

what I am really hoping for is some inspiration for a design for my boot that will give me max space but also good performance

any pictures of how people have set up their system would be muchly appreciated

thanks in advance

glenn

I'll get you some pics :P

I have a double sub box with two amps attached to the backs of the seats. works really well.

I also have an Alpine Media Centre D300E

Actually Glen, noticed you are SOR... You can see it in the flesh if you like, I"m kid free from 8am this morning lol to Sunday arvo..

my sub is at the back left hand corner of the Stagea, sits nicely between the rear of the wheel-well and the wagon door, strapped down, with the amp bolted to the back.

will post a picture for you when possible.

This is the sub box and the amps are just behind onthe backs of the seats. One amp is bolted on the 2 seater, and the other sits freely behind the other.

post-30699-1160612662.jpg

I'm going to get them attached to the back of the box at a later date.

The cargo barrier is upside down and is off a Falcon.

It isn't permanently bolted down as you can see, I have clips for easy lifting and its hinged... if I need to get to the space saver spare wheel.

The only reason I have the cargo barrier is to keep the dogs in the back without destroying the subs :laugh:

I will take more pics after work.

:O

Kylie

The cargo barrier is upside down and is off a Falcon.

It isn't permanently bolted down as you can see, I have clips for easy lifting and its hinged... if I need to get to the space saver spare wheel.

The only reason I have the cargo barrier is to keep the dogs in the back without destroying the subs :laugh:

Awesome .. can you get some close up of the barrier & how you botled it down. I'm def interested in getting one so l can take my dogs with me, and not have them climb over my new seat covers.

They are nice sounding subs, those DVC kenwoods, stageagirl... Best you can get for $250.

I had keyed my stereo in the "whats the damage" thread, but here we go -

Head unit - SONY CDX-GT700.

Streetwires RCAs and 0GA power and earth, 12GA speaker cables

2x Aepro 1-farad capacitors (PS54S...?)

4x Pioneer GM7200M 800W (25WRMS) monoblock amps

2x Pioneer 300C 1000W (400WRMS) subs

1x Pioneer GM 600F Four channel amp

Focal 165CA1 2 ways in rear doors

Focal (lost the box - no idea on code) Splits in front doors.

Pretty beefy system that pumps out good SPL, but is also a very nice, crisp, clear sound. Very punchy, even from a distance.

Currently i have:

Panasonic CQ7401 headunit

DLS reference MS6 fronts

Kicker S10L7 10" sub

a fusion fp1404 powering the fronts

and a pioneer GM-D510 M powering the sub.

Havent actually installed the DLS speakers yet as i just bought them.

Pics for interest.

8.jpg

SP_A0345.jpg

Some focal 165A1s that i used to have and also some JBL power 6.5s

Didnt like the focals at all and the jbls were okay.

6.jpg

I don't know what else I have.. there are tweeters in the doors with some other speakers and I have two huge amps..

Fuzzy I'll get some pics for you soon. Its a bit dark but I'll see how good the flash works on the camera.

My g'fs other half fitted the barrier for me so if it looks rough... lol

tweeters

post-30699-1160652177.jpg

Should of started a new topic.. sorry all.

This is the plate for the barrier.. there probably are others that fit, but this one does... upside down lol

post-30699-1160651731.jpg

Next is the base attached like so...

post-30699-1160651822.jpg

And this is how its attached at the top. We cut into the handthingy to use the bolt. I also think a stronger bolt was used too.

post-30699-1160651890.jpg

Excuse the dirt. I bought the barrier second hand for $150 in Kalgoorlie and I haven't removed it to clean and paint it YET!

I just bought a new head unit today, never heard of the brand before but it plays mp3, dvd, all the stuff it needs to has a 3.5" screen and is a single din.

Nothing really wrong with my head unit now except for the fact it wont play my cd's have to use the stacker all the time.

i have two 12" fusion powerplant subs in my stagea running a jaycar monoblock amp.

they are set up similar to how kylie has hers, and they pump out 136.8 dB... way too loud for me to listen to comfortably

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...