Jump to content
SAU Community

Recommended Posts

Hi Guys n Gals,

I have an r33 with 720cc injectors (Tomie i think)(shit i think i spelt that wrong)...the injectors are way to big for what i need and i'm haveing trouble getting a sweet tune from them, i am looking for a clean swap for some 550cc injectors. My plans are for Mercury Motorsport to do the work and ideally would like the injectors dropped off there for the swap, i live 900kms away so i would book the car in for the work when i have confirmation on you wanting to do the swap. Mercury Motorsport are on the lookout for the 550cc for me as well. This is a genuine offer for a straight swap. You can contact me here through the site.

Cheers, Jason. B)

Link to comment
https://www.sau.com.au/forums/topic/90338-wanting-to-swap-720cc-injectors/
Share on other sites

  • 2 weeks later...
S15 SR20DET injectors are a direct fit and flow 480cc

but you need 1 1/2 sets :P

I'd be happy with a set of those secondhand. Evidently they must be JDM, and from a manual trans vehicle. Where from though?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...