Jump to content
SAU Community

Recommended Posts

As many of you would know I've spent waay more money on my car it than I intended and while she's a good bird I figure I can no longer afford to put parts on it.. hence some of my stuff has to go.

Oil cooler kit for SR20 [sOLD!]

Braind new and contains:

- Serck 19 row oil cooler

- Hoses

- All connectors

- Perma-Cool remote filter kit for sr20

- B&M Thermostat

This kit was bought from a limited ns.com buy and is equivalent or better than a J-brand. This is *not* one of those noname cheapies you see floating around from JustJap or similar - so don't post up saying you can get an oil cooler kit for less.

Brand new - never used.

$450 - (SOLD)

http://members.optushome.com.au/tomokun/sell/sell1_09.jpg

http://members.optushome.com.au/tomokun/sell/sell1_08.jpg

http://members.optushome.com.au/tomokun/sell/sell1_10.jpg

http://members.optushome.com.au/tomokun/sell/sell1_13.jpg

http://members.optushome.com.au/tomokun/sell/sell1_11.jpg

http://members.optushome.com.au/tomokun/sell/sell1_12.jpg

Greddy Rocker Arm Stoppers

Purchased from garage-13

Bought a year ago for $250 with the intent of using with my cams. Never used, kept in wrapper in a dark cool place.

$150 - (SOLLLD pending payment)

http://members.optushome.com.au/tomokun/sell/sell1_06.jpg

http://members.optushome.com.au/tomokun/sell/sell1_07.jpg

Greddy Water Temp Gauge

Great condition

I bought this with the intention of going into my car. I've never used it. Can be used as oil temp gauge (Greddy use the same unit, you just take the sender out of the blue in-line thingy.)

$180

sell1_05.jpg

sell1_04.jpg

Greddy Oil Pressure Gauge (with memory) [sOLD!]

Great condition, has peak warn and memory

Again, purchased with the intention of going into my car. I've never used it. Has a mini ECU for remembering stuff and doing peak warning and so forth (top of the line gauge).

$200 - (SOLD)

http://members.optushome.com.au/tomokun/sell/sell1_03.jpg

http://members.optushome.com.au/tomokun/sell/sell1_02.jpg

s14/r33 Standard rims [sOLD!]

Great condition

Purchased to go drifting with. They wear P-Zero circuit slicks. 2 slicks are dead, the other 2 could probably do a lap or two.

I think stock wheels are 16x6.5 but could be wrong. Will also give you 4 drift ready street tyres to go with them (unfitted).

$250 - (SOLD)

http://members.optushome.com.au/tomokun/sell/sell1_15.jpg

http://members.optushome.com.au/tomokun/sell/sell1_14.jpg

http://members.optushome.com.au/tomokun/sell/sell1_01.jpg

I reckon these things are all very reasonably priced and I'm already losing money on them. I will check the forum every couple of days but first in best dressed so if you're interested gimme a ring on 0410 532 548 (tom).

I prefer pickup or delivery around the North Shore area of Sydney. Can post at your expense except for the RAS because I've had RAS bent by the post (the pair I'm selling is a replacement to the ones bent in the post).

Cheers,

cc

interested in $100 plus shipping for the temp guage?

For $100 you should go down to your local kmart auto section and look at the fantastic range there of autogauge gauges.

Wheels sold. Water/oil temp gauge remaining. 0410 532 548.

  • 5 months later...
For $100 you should go down to your local kmart auto section and look at the fantastic range there of autogauge gauges.

Wheels sold. Water/oil temp gauge remaining. 0410 532 548.

G'day mate - is that Greddy temp guage the alarm type with memory function?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...