Jump to content
SAU Community

Recommended Posts

I have been watching this for a while now.

With a mixture of Provincial Town and Highway driving, I have been getting between 9.5 and 14.0 l/100kms. Most of the figures were around 11 or so.

Come on guys. Do the right thing and work your usage out correctly. Don't just rely on the old "I get such and such per tank".

If anyone wants to know how to do it just ask.

El Bee

im not thard hard on the throttle and ive only had the car a few weeks running standed boost 31/2 cat back and a pod ive been using 8.70 lt to 100ks i havent really done a full on country drive but im rapt with it

I have been watching this for a while now.

With a mixture of Provincial Town and Highway driving, I have been getting between 9.5 and 14.0 l/100kms. Most of the figures were around 11 or so.

Come on guys. Do the right thing and work your usage out correctly. Don't just rely on the old "I get such and such per tank".

If anyone wants to know how to do it just ask.

El Bee

Recently had some changes to the fuel system, and now the economy is up to nearly 12l/100kms.

Oh well. You get that.

El Bee

wat's wrong wif ma car.. can sumone tell me. -.-/

man.. mine take 16-20L/100km in town.. not city..

i have cleaned injector with Full Fuel cleaning oil from NULON..

which cleans injectors as well..

but sumhow it still drink fuel too much..

any suggestion?

wat's wrong wif ma car.. can sumone tell me. -.-/

man.. mine take 16-20L/100km in town.. not city..

i have cleaned injector with Full Fuel cleaning oil from NULON..

which cleans injectors as well..

but sumhow it still drink fuel too much..

any suggestion?

I'm on the same boat dude.... I have done absolutely everything to improve my fuel economy, but still only get 18-20L/100kms. I think my HKS SSQV BOV is the culprit.... are you running atmo type BOV on your car? Will try to install SAFC2 and see how it goes

Try changing the O2 sensor, mine got a bit better after

Edited by dd4321
12l/100km is as good as it can get for GTSTs.

400km per tank is pretty avg.

Gday BL01,

Before the "Fuel changes" I was getting in the 10s/100kms. Now it is in the 11s.

Still, the extra power has to come from somewhere. :) B)

Our driving is a mixture of Provincial Town and Highway so we don't use as much as the city folk thankfully. :wub:

El Bee

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...