Jump to content
SAU Community

Recommended Posts

Friend of mine is an importer of Defi Gauges, so we can all get gauges at wholesale cost!!! He is about to do a large order, and wants to get the order total up.

He's not supposed to sell direct, so I am doing it for him.

Go to http://www.defi-shop.com/ to choose the parts you want - please make sure you know all the parts you need (remember the controller, stands and extension cables etc!!!)

You can email me what you want at [email protected].

Orders will close at midnight on October 31 2005, so you need to email me your order and payment receipt before then.

When you pay, please include your full name on the "Comments" section, so I know what payment is for what order.

I've used my business ABN, so it is not a personal account.

As this is all cost price for me, you need to add a little for postage from Brisbane to where ever you are, as well GST.

Commonwealth Bank Account Name: Glodiv

BSB#: 064131

Acc#: 1019 3929

ABN: 74 369 051 742

If you want to check, my website is www.glodiv.com

Hope some of you guys can benefit too... I am getting some gauges...

Adam

0412 631 081

Defi Price List

PartNo. Description price

BF Meter

DF04301 Turbo Meter 60 BF $236.25

DF04401 Oil Press.Meter 60 BF $275.63

DF04501 Fuel Press.Meter 60 BF $275.63

DF04601 Oil Temp.Meter 60 BF $206.72

DF04701 Water Temp.Meter 60 BF $206.72

DF04801 Exhaust Temp.Meter 60 BF $275.63

DF04901 Intake Manifold Press.Meter 60 BF $236.25

BF Amber Red Meter

DF04302 Turbo Meter 60 BF AR $236.25

DF04402 Oil Press.Meter 60 BF AR $275.63

DF04502 Fuel Press.Meter 60 BF AR $275.63

DF04602 Oil Temp.Meter 60 BF AR $206.72

DF04702 Water Temp.Meter 60 BF AR $206.72

DF04802 Exhaust Temp.Meter 60 BF AR $275.63

DF04902 Intake Manifold Press.Meter 60 BF AR $236.25

52mm Meter

DF01905 Turbo Meter 52, White $196.88

DF01906 Turbo Meter 52, Black $196.88

DF02005 Oil Press.Meter 52, White $225.00

DF02006 Oil Press.Meter 52, Black $225.00

DF02105 Fuel Press.Meter 52, White $225.00

DF02106 Fuel Press.Meter 52, Black $225.00

DF02205 Oil Temp.Meter 52, White $159.38

DF02206 Oil Temp.Meter 52, Black $159.38

DF02305 Water Temp.Meter 52, White $159.38

DF02306 Water Temp.Meter 52, Black $159.38

DF02405 Ext.Temp.Meter 52, White $225.00

DF02406 Ext.Temp.Meter 52, Black $225.00

DF05501 Intake Manihold Press.Meter 52, White $196.88

DF05502 Intake Manihold Press.Meter 52, Black $196.88

60mm Meter

DF00605 Turbo Meter 60, White $196.88

DF00606 Turbo Meter 60, Black $196.88

DF00705 Oil Press.Meter 60, White $225.00

DF00706 Oil Press.Meter 60, Black $225.00

DF00805 Fuel Press.Meter 60, White $225.00

DF00806 Fuel Press.Meter 60, Black $225.00

DF00905 Oil Temp.Meter 60, White $159.38

DF00906 Oil Temp.Meter 60, Black $159.38

DF01005 Water Temp.Meter 60, White $159.38

DF01006 Water Temp.Meter 60, Black $159.38

DF01105 Ext.Temp.Meter 60, White $225.00

DF01106 Ext.Temp.Meter 60, Black $225.00

DF01205 Tacho Meter 60, White $121.88

DF01206 Tacho Meter 60, Black $121.88

DF05401 Intake Manihold Press.Meter 60, White $196.88

DF05402 Intake Manihold Press.Meter 60, Black $196.88

80mm Meter

DF03405 Tacho Meter 80, White (9000rpm) $157.50

DF03406 Tacho Meter 80, Black (9000rpm) $157.50

DF03407 Tacho Meter 80, White (11000rpm)$157.50

DF03408 Tacho Meter 80, Black (11000rpm)$157.50

DF06101 Turbo Meter 80, White $236.25

DF06102 Turbo Meter 80, Black $236.25

115mm Meter

DF02803 Turbo Meter 115, White $275.63

DF02804 Turbo Meter 115, Black $275.63

DF02905 Tacho Meter 115, White $196.88

DF02906 Tacho Meter 115, Black $196.88

Defi-Link Display & VSD

DF05101 Defi-Link Display $318.75

DF05701 Defi-Link Display VSD Concept $315.00

DF03205 VSD Basis $155.53

DF03206 VSD Basis, Export Version $155.53

Sensor Set

PDF00713SS Oil Press. Sensor Set (Sensor + Harness) $148.13

PDF00806SS Fuel Press. Sensor Set (Sensor + Harness) $148.13

PDF00908SS Oil Temp. Sensor Set (Sensor + Harness) $75.00

PDF01006SS Water Temp. Sensor Set (Sensor + Harness) $75.00

PDF01114SS EXT. Temp. Sensor Set (Sensor + Harness) $176.25

Control Unit

DF05001 Control Unit-II $109.69

DIN-Gauge

DF05601 DIN-Gauge, RH White $541.41

DF05602 DIN-Gauge, RH Black $541.41

DF05605 DIN-Gauge, LH White $541.41

DF05606 DIN-Gauge, LH Black $541.41

Meter Hood

DF03301 Triple Meter Hood 60mm, GD/GG $140.63

DF033A0 Triple Meter Hood 60mm, GC/GF/SF $262.50

DF03303 Triple Meter Hood 60mm, BE/BH $350.00

DF033DC Triple Meter Hood 60mm, DC5 $251.56

DF03302 Triple Meter Hood 60mm, EVO.7&8 $350.00

Accessories

DF01801 Indicator $29.22

DF05801 Indicator II $82.03

DF05301 Fitting Kit $13.13

DF05201 Single Meter Visor 60mm $19.69

Parts

PDF00614H Meter to Meter Harness 0.5m $9.38

PDF00615H Meter to Meter Harness 1m $11.25

PDF00707H Press.Sensor Harness 2m $28.13

PDF00906H Oil/Water Temp.Sensor Harness 2m $28.13

PDF01107H Ext.Temp.Sensor Harness 2m $42.19

PDF00604H Meter to Meter Harness 0.25m $5.63

PDF01303H Meter to Meter Harness 2m $14.06

PDF01302H Power Source Harness $9.38

PDF00603S Turbo Boost Sensor $71.25

PDF00703S Oil/Fuel Press.Sensor $129.38

PDF00903S Oil/Water Temp.Sensor $46.88

PDF01103S Ext.Temp.Sensor $142.50

PDF00704H Oil Press.Sensor Harness $37.50

PDF00803H Fuel Press.Sensor Harness $37.50

PDF00904H Oil Temp.Sensor Harness $37.50

PDF01003H Water Temp.Sensor Harness $37.50

PDF01203H Tacho Signal Source Harness $15.00

PDF01801I DF1801 Indicator Only $28.13

PDF01802H Indicator Harness 1m $9.38

PDF01803H Indicator Harness 130mm $9.38

Link to comment
https://www.sau.com.au/forums/topic/91352-defi-gauges-bulk-buy/
Share on other sites

As this is all cost price for me, you need to add a little for postage from Brisbane to where ever you are, as well GST.

^^^ hmm so how much do we add for GST??

GST is set at 10% Australia wide ;)

Greg

  • 2 months later...

how much for these 2

BF Amber Red Meter

DF04802 Exhaust Temp.Meter 60 BF AR $275.63

DF04902 Intake Manifold Press.Meter 60 BF AR $236.25

+tax + delivery

pm thanks

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...