Jump to content
SAU Community

Recommended Posts

Elite Motorsport will be holding a club meet this friday 31st january (usual spot, in front of questacon by the lake) We will be taking some photos for our website etc.

Having some drags if anyone feels up for it again YAY!!! :)

Non-members more than welcome to come along and join in...

Look forward to seeing a big turnout.

Link to comment
https://www.sau.com.au/forums/topic/9261-elite-meet/
Share on other sites

John, whats been up man, how you doin, its Lee, didn't know you post on here?! Sorry i can't make it to the Gong cruise! How good is the next meet gonna be?! Can't wait till da next drags! Now all i need is a Skyline to take you on! P.S. Love the avatar, how long did it take to convince Erin to do that?

Link to comment
https://www.sau.com.au/forums/topic/9261-elite-meet/#findComment-138830
Share on other sites

Where exactly is Questacon?

Originally posted by eliter33

Elite Motorsport will be holding a club meet this friday 31st january (usual spot, in front of questacon by the lake) We will be taking some photos for our website etc.  

Having some drags if anyone feels up for it again  YAY!!!  :)

Non-members more than welcome to come along and join in...

Look forward to seeing a big turnout.

Link to comment
https://www.sau.com.au/forums/topic/9261-elite-meet/#findComment-143749
Share on other sites

yeah we had a cruise and drags on friday night. any guys that didn't make it; you guys up for a cruise next time? won't be too far away ;) was an awsome night, only one person got busted by the cops...... me :P hehehe oh well "win some, lose some" hehehhe :wave:

it was exactly like "the fast and furious" when the cops came :)

Link to comment
https://www.sau.com.au/forums/topic/9261-elite-meet/#findComment-146966
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
×
×
  • Create New...