Jump to content
SAU Community

Recommended Posts

  • Replies 139
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

fun times Mud...

looks like i lunched my engine on the way to work this morning....

something (i don't know what) appears to have gone through my compressor blades, which in turn has spat bits of metal through the intake, and possibly (most likely, seeing as i found lots of it around the throttle body) into the engine itself...

pulled a spark plug and i can see shiny flakes sitting on top of the pistons...

ah, so much fun!

fun times Mud...

looks like i lunched my engine on the way to work this morning....

something (i don't know what) appears to have gone through my compressor blades, which in turn has spat bits of metal through the intake, and possibly (most likely, seeing as i found lots of it around the throttle body) into the engine itself...

pulled a spark plug and i can see shiny flakes sitting on top of the pistons...

ah, so much fun!

I'll come to you,

We can push it out in the driveway/ road to take pics.

You can't get out of it that easily!

Dave, I have Wednesday 1pm - 3pm openif your not fdoing nything, otherwise tonight or Wednesday night?

James Wednesday night is a goer, where you wanna meet, which side of town are you on?

Jason, PM me you address, I'l be around tonight to do your car.

Dave, I have Wednesday 1pm - 3pm openif your not fdoing nything, otherwise tonight or Wednesday night?

James Wednesday night is a goer, where you wanna meet, which side of town are you on?

Jason, PM me you address, I'l be around tonight to do your car.

I'll wash the car tonite then. What time were you thinking?

If you can get to shell Nudgee tonight at 8:30 I can do you and James?

LoL, I'll be bloody going for it hey. Car is caked in mud from yesterdays storms.

But which one is that? The one off the gateway? I dont know northside at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
    • From memory, on the R33 GTSt at least, while everyone says "It's not adjustable", I found when I changed clutches in mine, it just needed a small adjustment on the rod length. But be very wary here, as you could end up trying to push the pushrod in the master too far, or blowing out the slave.   Most likely though, if the master/slave isn't bypassing internally or leaking out, then the throw out is the wrong height compared to the fingers on the clutch, so when it moves to disengage the clutch, it isn't 100% disengaged. You can check part of this out too by jacking the car up, having the engine running, put your foot on the clutch and try to engage 1st gear. If it goes in pretty easy (Compared to the ground) and/or the wheels start turning a fair bit and it takes a bit too much brake pedal to bring them back to a stop, this is likely the issue.  I'm not sure if you can adjust the height of the forks etc in these though, it's been that long since I've touched any RB gearbox.
×
×
  • Create New...