Jump to content
SAU Community

Recommended Posts

Well, as Autosalon is on here in Brisbane this weekend, I thought it would be a good time for the majority of us skyline cruisers to possibly get together and organise a cruise for tomorrow (Saturday) night as Autosalon closes down at 9pm to get ready for another day on Sunday.

So, who here would be interested in a cruise? Cruise would either start at around 9.30pm for those who have entered into the autosalon and can get their car out saturday night.

Or

Start the cruise at around 8pm for those skylines that can either leave early or did not enter in such as myself.

Those who are interested, please show your interest in responding. If not much of a response is given, then we might just give it a miss. But as the last skyline meet on the thursday night was a good outcome in my opinion, thought as we have a car event on this wknd, would be good to th skylines in a group.

Possibly even organise a few night time photo's as well, which could come in handy for the calander thats in progress as we speak.

Link to comment
https://www.sau.com.au/forums/topic/92743-autosalon-mass-skyline-cruise/
Share on other sites

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Yeah I don't mind going for a drive but it would be best if you described the meeting location, the direction we will be heading, some of the stops on the way.

When you organise a cruise you have to have it all prepared otherwise you won't get any takers. If people see that it looks like just a dodgy 'drive around' they won't bother coming because it looks as though you haven't put any thought into it.

I was just seeing the interest first to see if anyone wants to go through with the cruise. The next step would of been to see if they want to cruise around the city or down to BWCP.

Well.... my plan put forward.

Meet at Springwood Crazy Clarks at 8pm. From there we will leave and head down for a cruise towards BWCP with a pit stop in at Yatala BP. We'll leave Springwood Crazy Clarks right on 8.30pm and no later allowing us to meet up with the leavers from Yatala BP at 9pm.

Meet: Springwood Crazy Clarks 8pm.

Depart meet spot: 8.30pm SHARP!

Destination: BWCP.

Pit Stop: Yatala BP which we will arrive at approximately 8.50PM / 9PM. Depart from their with the others who usually meet at Yatala BP.

Edited by r33skyliner

I'll be there at 8pm.

Those who are within the cbd area. Let me know and we can meet at either coorparoo macca's along old cleveland rd at 7.30 or officeworks along ipswitch road at 7.30.

if no one will respond to wanting at meeting at these 2x locations, i wont turn up then and will go straight to springwood crazy clarks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...