Jump to content
SAU Community

32 Gtr Owners

2510s

By 2510s,
in Engines & Forced Induction

 Share

Recommended Posts

2510s Enthusiast

2510s

Posted
Posted

Just wondering how effective my HKS oil cooler is... Is there anyone that can tell me what sort of oil temps their GTRs are running without a cooler? Usually mine sits in between the bottom mark of the oil temp gauge and the 1/4 mark. With the warmer weather its been creeping up a little more to just under the 1/4 mark. I havn't had the car on the track yet so it's never been higher than that....

Link to comment
https://www.sau.com.au/forums/topic/92826-32-gtr-owners/
Share on other sites
Silver-Arrowz Grand Master

Silver-Arrowz

Posted
Posted

On the track, without oil cooler it will reach 130 degrees in no time (think the point where oil breaks down is 120-130 degrees). With an oil cooler (custom) and a larger radiator it would sit at 100-110 degrees, all day long.

Link to comment
https://www.sau.com.au/forums/topic/92826-32-gtr-owners/#findComment-1675474
Share on other sites
pnblight Mentor

pnblight

Posted
Posted

2510s everyday drive you don't need the cooler BUT if you want to get on the throddle for any sort of time ie track day, the oil cooler is a must like silver-arrowz said temp will go throught the roof in no time.

hope that helps

pete

Link to comment
https://www.sau.com.au/forums/topic/92826-32-gtr-owners/#findComment-1676427
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 GTR Speedo Drive , sensor type ?

      By GTSBoy · Posted

      It's almost certainly a reluctor generating an "AC" waveform. No, ECUs don't generally read those - they're usually set up for PWM square wave 0-5v stuff.
    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
×
×
  • Create New...