-7 0 +7

[flukey]

i have this reading on my dash, what does it mean and where is it meant to be at when u start the car??????????????? NEEED HELP

[flukey]

by the way i own a 1992 model r32 gtst with type m body kit

[jazza08]

dude its a factory boost gauge

Should always be sitting in negative unless you put ur foot down and come into boost. +7 would be above or at 7psi of boost!

If your car was N/A it'd have a voltage meter lol

[siddr20]

Boost readings..

Should be in negatives when u first start car..

[flukey]

dude its a factory boost gauge

Should always be sitting in negative unless you put ur foot down and come into boost. +7 would be above or at 7psi of boost!

If your car was N/A it'd have a voltage meter lol

<{POST_SNAPBACK}>

there are ppl who told me that it should sit at zero, and that my car is running 10psi

its like stock as a rock

[siddr20]

10psi?? a bit high for a stock as a rock car..

[flukey]

well thats what a guy that service my car said is that bad how would i know

[gts25t4door]

in my R33 the +7 and -7 is my stock boost guage. When I put my foot down it will jump up to about the +3.5 mark, it is not a PSI reasing it is a 100xHg so I think it turns out to be around 6 or 7 psi. But thats in the R33 models, dont know if thats the same in the R32s.

Chris

[Haysey]

i think you nearly have to double the reading....

im running 13psi on my R32 and it sits just above the +7 line

[paulr33]

+700mmhg is 13.5psi

so half on the stock boost guage (past 0 aka 3.5) is 7psi

[Kaido_RR]

the stock boost gauge is f**ked, dont trust it, it always lies!!!

Lies!! i tell u

anyways for real, dw about that that guages reads go get urself a cheap boost gauge and it will solve ur problem

[Rj34GTT]

Im Assuming my one is read like this..

Please point out if i am mistaken..

[GTAHH]

My car has a cat back exhaust and runs 10psi as stock, I have a greddy boost gauge because the dash one lies and plays up all the time. But when it's working the greddy says 0.7bar and the dash boost says +7. So don't know whats going on there. I thought that R32 runs 10pound stock?

[GTAHH]

Im Assuming my one is read like this..

Please point out if i am mistaken..

<{POST_SNAPBACK}>

Yeah i'm sure 1 kg/cm2 is the same as 1 bar. So 0.7 kg/cm2 is 0.7 bar. Or they are very close

[RB240Dav]

So what's stock psi or kb/cm^2 on the GTR r32 (high-jacking, but kinda applies to subject)

[jazza08]

On R32 gtst 10psi is stock dude

Note the lower compression than sr20/rb25 etc hints why a few more psi. Install a real boost gauge as the dash one's dont really work to well anyhow lol