Jump to content
SAU Community

Hpc

MRK25T

By MRK25T,
in Engines & Forced Induction

 Share

Recommended Posts

MRK25T Experienced

MRK25T

Posted
Posted

I'm thinking about getting come HPC coating done and want to do it all in one hit.

For me the HPC will serve 2 purposes:

1. reduce heat since i'll be running a bar or so of boost

2. It looks good.

What should I have done to cover both bases?

Will it give me a increase in performance?

What parts should I polish instead of HPC?

Lastly, i've never seen any pricing on HPC coating. What will it cost?

Mark

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

Hi Guys,

I was looking at getting my exhaust manifold coated so I gave these guys a call, it's about $550 to get the exhaust manifold coated.

If your after serious performance then you should ceramic coat the exhaust manifold and turbo exhaust housing. HPC coat the intercooler pipes, most important is the intake manifold pipe.

I think that with a combination of HPC, cold air induction you will see a decent performance improvement due to the cooler intake temperatures. Don't forget that heat wrapping will provide similar results, but it doesn't look as good.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140502
Share on other sites
sidewaymambo Mentor

sidewaymambo

Posted
Posted

I'm new to this process, but I understand the advantage of HPC and ceramic coat ( I always though that hot gas will run faster..), however does ceramic coat can apply on "any" surface? for example, I have a set of trust stainless manifold and mild steal..dump + front pipe, should I ceramic coat the them? or just the manifold?

I know the heat warpping, but does it capable to handle 1200+ temperture? thanks..

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140723
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

I've just ordered a stainless dump pipe, and have a Trust mild steel front pipe. I called HPC (www.hpcoatings.com.au) last week and the guy quoted me $66 per foot for piping. I figured that because hot gas travels quicker, and the next main restriction is the cat, that this would be enough of the exhaust system to do.

PS they need 5 days to do the coating.

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140896
Share on other sites
GTS-t VSPEC Grand Master

GTS-t VSPEC

Posted
Posted

sidewaymambo,

You can ceramic coat just about any metal surface, if it has already been used then they will need to clean it and bake it so that the ceramic coat will stick. Ceramic coating is best for exhaust manifold, dump pipe, front pipe and turbo exhaust housing. I think if you want to do intercooler pipes then either use heat wrap or HPC.

The heat wrap will work fine in high temperatures like on your exhaust manifold, just make sure you buy the right stuff, and not some cheap brand.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-140901
Share on other sites
MRK25T Experienced

MRK25T

Posted
  • Author
Posted

Keep me up-to-date on any quotes you get for the HPC coating.

What sort of performance gains would I realise if I get the exhaust manifold, turbo exhaust housing and intake manifold pipe as VSPEC suggested? and has anyone got any ball park figures for this work - I cant call them while i'm at work.

I might leave them an email instead.

Mark

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-141718
Share on other sites
Ronin 09 Grand Master

Ronin 09

Posted
Posted

I'm with steve. If we can organize a group 'coating' maybe it will be cheaper. I will call them tomorrow and see if they will do a group discount, and if so start a new thread and will try and organise it with HPC. Not sure how we can logistically do it - send all parts to me and then to HPC? or send them individually?

If i organise it probably keep it to the Vic boys and girls, just it is easier than doing everywhere. I will keep you posted, check here and if i start a new thread i'll link it to here.

Link to comment
https://www.sau.com.au/forums/topic/9341-hpc/#findComment-141955
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...