Jump to content
SAU Community

Recommended Posts

the learning curve thingy isn't it automated?

yah the blitz SBC i colour is a combination of SBC iD <-- boost controler and power id or sumthing allows you to check the power, in horsepower and kilowatts at the engine...I think it's inaccurate tho...works like the Apexi RSM with the G sensor attached

the display of the SBC i colour look like hand phone colour display..cool stuf..but damn expensive..

cheapest electronic boost controller is the Greddy profac B-spec II I guess..abd $450 each, Apexi AVCR at $600 each, and the SBC I colour I think it's abt $1000....

I've used AVC-R in a wrx sti type-r and it held 1.3 bar boost stable as hell. Worked well with an evo 8 too. Maybe it's just me being too comfortable with it. LoL. Haven't experienced anything bad with it... so I'm happy with the product.

The thing about buying a 2nd hand AVC-R or anything for that matter is that solenoids can and will spoil. So when u purchase a 2nd hand one it can be a little risky. And the solenoid from apexi alone is not cheap. almost $200 if i'm not wrong? So it might be safer to get a new one.

any blitz product will work best

tuners dont like the avc-r and yes its easiest 2 fit into skyline

avc-r is siingle soleniod compared to the rest that are dual, probably why it wont hold boost on some appplications

greddy use fuzzy logic which has its disadvantages. google it and find out cbf typing more

Tuners don't like AVC-R ? I don't know where u heard that one from.. maybe it's the case here.. but not from where i'm from. But it really boils down to the user. If you're goin high boost, then a dual solenoid would work very much better than a single. I prefer the AVC-R due to the fact that it's more tuneable..more complex. It takes lots of time to just tune the avc-r properly, and if u do it right, it works like a charm. Had no experience with the Blitz so i can't really compare, but from what i gather, it's a good product, but the functions available is more limited than the avc-r.

Woo! thanks ppl for the info! I'm all over the shop :)

R33 IMPUL, that combo sounds like the way, but I'm thinking of trying to get round the 300HP mark, bit more. I think cause of that, running the SAFCII etc might not work too well because of the auto factor.

Thanks again guys, you've all been alot of help!

I'll talk a bit more with some tuners and take it from there I think.

Tuners don't like AVC-R ? I don't know where u heard that one from.. maybe it's the case here.. but not from where i'm from. But it really boils down to the user. If you're goin high boost, then a dual solenoid would work very much better than a single. I prefer the AVC-R due to the fact that it's more tuneable..more complex. It takes lots of time to just tune the avc-r properly, and if u do it right, it works like a charm. Had no experience with the Blitz so i can't really compare, but from what i gather, it's a good product, but the functions available is more limited than the avc-r.

and you were laughing at my previous post, ill enjoy hearing what you have to say. u enjoy it because it is complex. rule of thumb is something complex is worse when theres simpler examples. next thing u will be telling me u still running ms-dos or sumthing cos its more challenging. fact that u mention it takes lots of time to tune it is the same reason tuners dont like it. and yes ive seen a well tuned evo 8 in singapore with a gear judge tuned avc-r (garage R) and even the owner reckoned it wasnt worth it. just needed to match with the interior so it was a cosmetic factor

BTW i got avc-r and its shite & i know where your coming from with its features. but its meant to control boost-period, not takeover iraq

Edited by kidd
and you were laughing at my previous post, ill enjoy hearing what you have to say. u enjoy it because it is complex. rule of thumb is something complex is worse when theres simpler examples. next thing u will be telling me u still running ms-dos or sumthing cos its more challenging. fact that u mention it takes lots of time to tune it is the same reason tuners dont like it.  and yes ive seen a well tuned evo 8 in singapore with a gear judge tuned avc-r (garage R) and even the owner reckoned it wasnt worth it. just needed to match with the interior so it was a cosmetic factor

BTW i got avc-r and its shite & i know where your coming from with its features. but its meant to control boost-period, not takeover iraq

Now we're gettin personal are we? Look. I ain't here to start a war or shoot down iraq as u said. Since u have the avc-r you should know about it's features and such.

You said anything from blitz is good. And it was just vague, it sounded as if you were a small kid who when pple said there is santa clause, u went around telling everyone that there really is.

I did some reseach on the blitz and i agree it's fantastically good from what i read. So much so that i'm considering getting it instead of the avc-r. If I never try new stuff, I'll never know what's better. Change is important for advancement. Without it, the whole world would be stagnant and we wouldn't have colour televisions and tv's and plasma and lcds.

No, i'm not telling u to use ms dos, but i do encourage linux. It's more complex and it's for the advanced user. Not anyone can handel ssh or telnet or stuff like that. And sometime ago Linux came out with a GUI. The favourite part about linux is it's stable, but more complex.

I personally don't think avc-rs are shit, but again to each their own. I felt tuning it was fun, interesting and i learnt new stuff, eg duty cycle, different settings at different rpms. The avc-r was the best at the time in 1999. Simple as that. And now times have changed. It worked fine as hell for me, with my tuning which took a whole day of fun. Spiked once in a rare while, which is like almost never. And responsive when i need it for more spirited driving. So when pple tell me avc-r is sucky, i believe it boils down to their tune of stuff. The user, not the unit, as the unit is not as intelligent as the new SBC 3 and needs a lot of work to be tuned.

Cheers! :O

P/s: Regarding my previous post, if u noticed, i'm not one to insult pple. So if u took it as that, then sorry dude, no malice intended. :)

Actually i don't find it unstable. It's just very complex, which i find challenging. To a point that u definitely need to take some time to fully understand and tune it. A rushed job or impatiance can cause it to be unstable. That's the reason why i took 1 full day and 1 & 1/2 tank of gas just to get it tuned properly. Worse than doing a dyno. LoL :) Treat it with love and care, and it'll show the same. Maybe it just loved my car and my car loved it too. LOL.

Actually i don't find it unstable. It's just very complex, which i find challenging. To a point that u definitely need to take some time to fully understand and tune it. A rushed job or impatiance can cause it to be unstable. That's the reason why i took 1 full day and 1 & 1/2 tank of gas just to get it tuned properly. Worse than doing a dyno. LoL :blink: Treat it with love and care, and it'll show the same. Maybe it just loved my car and my car loved it too. LOL.

you just got lucky

do a search

they suck

but look rice

" While the AVC-R is supposed to tune itself, it seems the brunt of the work is on your shoulders. If you like to fiddle with things, you'll be in heaven. " Yeahh... my heaven! hehehe. Anyone has any idea if the sbc 3 can vary the boost with rpm? Cause u don't need the boost to suddenly kick in for day to day driving. Decided to go with the blitz to try it out. :(

another one here with avcr and im undecided. i found if i turn the learning off its a lot more stable even without tuning. i agree that it is complex and im sure its awesome if you spend 7.5 hours tuning it but all im after is stable boost. iraq to myself would be pretty cool though...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...