Jump to content
SAU Community

Recommended Posts

Running a set of TEIN HR's on my 32 with killa results, very stiff they reduce body roll alot by themselves....i love em. Theyre a snap to adjust and feel great on the car

there hight and dampner adjustable right? if you dont mind me asking what did you pay for them i can get a new s13 set for $1500 does that sound right

My 20 cents worth;

Simplistially valved small bore, Japanese shock designed for billiard table smooth roads. Fitted with far too high spring rates for Australian conditions. Harsh ride and poor traction.

There are far better shocks and more suitable spring rates available at lower prices, check out the Group Buy thread for your particular Skyline model.

:) Cheers :)

HR's are just height adjustable.......i dont mind the ride but then again my cars being built for drift so they're pretty close to perfect. Thinking about upgrading to a ZEAL package with S.W.I.F.T springs, but il find more out about them. Sydney kid poses a point, and it all depends on what ur building it for, there are better shocks and springs for aussie road conditions to provide a better ride, but if ya like it stiff and bumpy then TEINS are great.

what others do you sugest are more suitible for ausie roads i dont neceserily want coilovers but im gonna drift the gazelle(i know its not a skyline but all the guys on the silnia forms are dumb as sh it) as well as have it as a daily so i want some thing versitile

Edited by b4gibbo

So ul definately need something realtively stiff for track work and knda soft for evryday use....give sydney kid a pm and ask, but my suggestion would be TEIN HA's instead of HRs, coz that way u get damper adjustable so u can just easily set it stiff wenu go out and smoother wen ur daily driving. Bit more expensive but well worth it, theres plenty of sus out there, im enjoying TEIN at the mo daily and drift.

So ul definately need something realtively stiff for track work and knda soft for evryday use....give sydney kid a pm and ask, but my suggestion would be TEIN HA's instead of HRs, coz that way u get damper adjustable so u can just easily set it stiff wenu go out and smoother wen ur daily driving. Bit more expensive but well worth it, theres plenty of sus out there, im enjoying TEIN at the mo daily and drift.

im running s13 tein's in my r30 the super street damper kit,and ive found them to be excellent .

Not too harsh on the street and trust me the roads around my area pretty damn average,at the same time a very nice setup for the both the strip and the track im more then happy :P

And theyre both height and damper adjustable.

im running s13 tein's in my r30 the super street  damper kit,and ive found them to be excellent.

A comparison between an R30 strut front end and a double wishbone Skyline is not particularly relevant. They are quite different animals.

My suggestion would be to use adjustable stabiliser bars rather than excessively high spring rates. That way you can tune the car for road or drift by adjusting the antiroll rates, much easier than changing springs and shocks.

This is a link to the R32GTST Group Buy, I believe it should answer most of your questions.

http://www.skylinesaustralia.com/forums/in...showtopic=85591

If you should require additional clarification please just ask.

:) cheers :)

Simplistially valved

I've heard you mention this a few times about japanese suspenison.

Care to elaborate on this? I'm just a bit curious about what aspects of suspension valving improve shock performance. (It's also a fairly broad statement don't you think...)

I'm curious about what differences there are in valving between say Tien Flex shocks and Bilstien shocks. And also if some of the more expensive japanese brands illeviate this problem. (after all, brands like Tien in Japan are considered the "budget" coilover shock)

Actually the brand of shocks I'm using at the moment are Quantum, which are some english brand, can't find much info on them, only that they cost alot more than Tiens new.

This was the only info i could find on them if you can read japanese...

http://www.nova-eng.co.jp/Part/QUANTUM/quantum-1.htm

sorry if im hijacking your thread mate!

Edited by MerlinTheHapyPig

yeah i have some adjustable sway bars on the way to reduse the s12 masive body roll but the stock suspenion is way worse than say r32 skyline suspension and i dont want super stiff shocks i want comfy rasponzive ride im looking into the super streets now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I saw you mention this earlier and it raised a red flag, but I couldn't believe it was real. Yes, the vacuum signal should vary. It is the one and only load signal from the engine to the ECU, and it MUST vary. It is either not connected or is badly f**ked up in some way.
    • @Haggerty you still haven't answered my question.  Many things you are saying do not make sense for someone who can tune, yet I would not expect someone who cannot tune to be playing with the things in the ECU that you are.  This process would be a lot quicker to figure out if we can remove user error from the equation. 
    • If as it's stalling, the fuel pressure rises, it's saying there's less vacuum in the intake manifold. This is pretty typical of an engine that is slowing down.   While typically is agree it sounds fuel related, it really sounds fuel/air mixture related. Since the whole system has been refurbished, including injectors, pump, etc, it's likely we've altered how well the system is delivering fuel. If someone before you has messed with the IACV because it needed fiddling with as the fuel system was dieing out, we need to readjust it back. Getting things back to factory spec everywhere, is what's going to help the entire system. So if it idles at 400rpm with no IACV, that needs raising. Getting factory air flow back to normal will help us get everything back in spec, and likely help chase down any other issues. Back on IACV, if the base idle (no IACV plugged in) is too far out, it's a lot harder for the ECU to control idle. The IACV duty cycle causes non linear variations in reality. When I've tuned the idle valves in the past, you need to keep it in a relatively narrow window on aftermarket ecus to stop them doing wild dances. It also means if your base idle is too low, the valve needs to open too much, and then the smallest % change ends up being a huge variation.
    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
×
×
  • Create New...