Jump to content
SAU Community

Recommended Posts

Ok,

On the way to work this morning, accelerating from some traffic lights (not up it, just driving normally) changed into 3rd and just as i started to come on boost i heard a 'bang' and the car lost boost, and a big puff of browny/greyish smoke came out the back... limped it into a servo about 100 metres up the road, checked for an intercooler pipe off or something... couldn't see anything... Then a guy from East Coast Customs saw the car sitting there after a while, and offered to take a look at it. I limped it to their workshop (like, 2 doors down) and we ripped the intake apart, to find that something has gone through the compressor blades of the turbo, totally annihilating it.... it was then i noticed numerous 5cent piece, and some smaller, sized chunks of metal sitting in my intake pipes, we investigated further, and there's some around the throttle body too... mainly smaller shavings though.... i pulled a spark plug out, and i can see shiny bits stuck in the top of the pistons... :(

I did a search, but couldn't come up with much (recent info anyway)

I'm wondering if anyone knows any good engine builders in Brisbane, that actually know what they're doing, do good work, and aren't bloody ripoff artists?

Thanks in Advance

Jason

Link to comment
https://www.sau.com.au/forums/topic/95719-lunched-rb20-need-rebuild/
Share on other sites

Mud, the thought crossed my mind, but then it occurred to me that you're playing a bit of russian roulette with a 2nd hand engine... don't know if you're going to get a good one or one that will die in 3 months time....

at least with a rebuilt engine you know exactly whats in it, how its been treated etc...

And Chaos... i'm glad you didn't suggest them, or i'd have to hurt you :(

They would just out-source it to someone else anyway and then whack a stupid percentage on top of the cost for themselves....

anyone heard of 'Tuned Automotive'?

They sponsor a friend of mine for Drifting, and he swears by them... i just gave them a call and they seem nice enough, seem to know a bit about what they're talking about too.... going to send me a quote through soon...

Their website is:

http://tunedautomotive.com.au/

JH Hill. He will tell you to go an rb30dett tho... Just say you dont have the money to do so, and would like to keep the rb20, he should be right from there.

He does the Jett racing cars, few others over the years. Quite good with RBs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...