Jump to content
SAU Community

Nissan Skyline R33 Gts-t Series 1.5

thenic1

By thenic1,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

thenic1 Apprentice

thenic1

Posted
Posted (edited)

B) FOR SALE! B)

post-10358-1132636402.jpg

:D 1993 Nissan Skyline r33 gts-t 2.5 Straight 6 Turbo. :)

:lol: $15.000.00 :lol:

Car is in Orange NSW

Metallic Grey

1 Owner

Factory standard options.

Mechanics are in A1 condition and clean throughout.

Has not been repaired once, car is bullet proof.

Body in Excellent condition.

Paint is original and in good condition and well maintained.

Interior is in Immaculate condition. Well looked after car.

Some Scrapes on the bottom of front bar, but bearly noticeable and some stone chips

No smoking

Has done 85,000kms

I have only put on 8,000kms since I brought it. Has been Dyno tuned by UAS in Castle Hill and CRD in Silverwater and puts out 192rwkw at 14lb boost with stock turbo and intercooler, always run at 10lb boost, about $1300 spent just on tuning.

Has been serviced and oils changed using MOTOL oils by UAS in Castle Hill.

Fully road registered and has not been defected.

EXTRAS HAVE BEEN ADDED

Since purchased April 2004, including:

3in Cat Back Exhaust with 12in Hotdog and 5in Canon

K&N Pod Filter

Blitz SBC spec S Boost Controller

Pivot Speed Meter X

Field Electronic Fuel Controller

Drift Oil Catch Tank

OS Giken Adjustable Exhaust Cam Gear

Turbosmart Dual Port BOV

Some Silicon Hoses

MOMO Chrome Gear Knob on Shortened Gear Stick

Matrix Racing Pedals

Comes with but not installed:

APEXI Power FC ECU (no hand controller)

Earth wirers for better engine grounding and power output

Sure to get more than 200+kw at wheels with these installed. These are to be sold with car. Please don't ask if I will sell them separately

This would be a great car for building up on. It has most of the parts installed to get the job done. Only parts you would have to add is front mount intercooler, big turbo or

YOU CAN GO EXTREME, IT'S UP TO YOU!

Still has 6 months warranty left. Has to April 2006 rego.

$15000

Anybody interested. POST ME A MESSAGE

post-10358-1132636093.jpg

post-10358-1132636560.jpg

post-10358-1132636629.jpg

post-10358-1132636670.jpg

post-10358-1132636715.jpg

post-10358-1132636765.jpg

post-10358-1132636803.jpg

post-10358-1132636835.jpg

post-10358-1132637213.jpg

post-10358-1132637291.jpg

Edited by thenic1
Link to comment
https://www.sau.com.au/forums/topic/95870-nissan-skyline-r33-gts-t-series-15/
Share on other sites
thenic1 Apprentice

thenic1

Posted
  • Author
Posted
B) FOR SALE! B)

post-10358-1132636402.jpg

;) 1993 Nissan Skyline r33 gts-t 2.5 Straight 6 Turbo. :P

:lol: $15.000.00 :lol:

 

Car is in Orange NSW

Metallic Grey

1 Owner

Factory standard options.

Mechanics are in A1 condition and clean throughout.

Has not been repaired once, car is bullet proof.

Body in Excellent condition.

Paint is original and in good condition and well maintained.

Interior is in Immaculate condition. Well looked after car.

Some Scrapes on the bottom of front bar, but bearly noticeable and some stone chips

No smoking

Has done 85,000kms

I have only put on 8,000kms since I brought it. Has been Dyno tuned by UAS in Castle Hill and CRD in Silverwater and puts out 192rwkw at 14lb boost with stock turbo and intercooler, always run at 10lb boost, about $1300 spent just on tuning.

Has been serviced and oils changed using MOTOL oils by UAS in Castle Hill.

Fully road registered and has not been defected.

EXTRAS HAVE BEEN ADDED

Since purchased April 2004, including:

3in Cat Back Exhaust with 12in Hotdog and 5in Canon

K&N Pod Filter

Blitz SBC spec S Boost Controller

Pivot Speed Meter X

Field Electronic Fuel Controller

Drift Oil Catch Tank

OS Giken Adjustable Exhaust Cam Gear

Turbosmart Dual Port BOV

Some Silicon Hoses

MOMO Chrome Gear Knob on Shortened Gear Stick

Matrix Racing Pedals

Comes with but not installed:

APEXI Power FC ECU (no hand controller)

Earth wirers for better engine grounding and power output

Sure to get more than 200+kw at wheels with these installed. These are to be sold with car. Please don't ask if I will sell them separately

This would be a great car for building up on. It has most of the parts installed to get the job done. Only parts you would have to add is front mount intercooler, big turbo or

YOU CAN GO EXTREME, IT'S UP TO YOU!

Still has 6 months warranty left. Has to April 2006 rego.

$15000

Anybody interested.    POST ME A MESSAGE

thenic1 Apprentice

thenic1

Posted
  • Author
Posted
B) FOR SALE! B)

post-10358-1132636402.jpg

:) 1993 Nissan Skyline r33 gts-t 2.5 Straight 6 Turbo. :)

:lol: $15.000.00 :lol:

 

Car is in Orange NSW

Metallic Grey

1 Owner

Factory standard options.

Mechanics are in A1 condition and clean throughout.

Has not been repaired once, car is bullet proof.

Body in Excellent condition.

Paint is original and in good condition and well maintained.

Interior is in Immaculate condition. Well looked after car.

Some Scrapes on the bottom of front bar, but bearly noticeable and some stone chips

No smoking

Has done 85,000kms

I have only put on 8,000kms since I brought it. Has been Dyno tuned by UAS in Castle Hill and CRD in Silverwater and puts out 192rwkw at 14lb boost with stock turbo and intercooler, always run at 10lb boost, about $1300 spent just on tuning.

Has been serviced and oils changed using MOTOL oils by UAS in Castle Hill.

Fully road registered and has not been defected.

EXTRAS HAVE BEEN ADDED

Since purchased April 2004, including:

3in Cat Back Exhaust with 12in Hotdog and 5in Canon

K&N Pod Filter

Blitz SBC spec S Boost Controller

Pivot Speed Meter X

Field Electronic Fuel Controller

Drift Oil Catch Tank

OS Giken Adjustable Exhaust Cam Gear

Turbosmart Dual Port BOV

Some Silicon Hoses

MOMO Chrome Gear Knob on Shortened Gear Stick

Matrix Racing Pedals

Comes with but not installed:

APEXI Power FC ECU (no hand controller)

Earth wirers for better engine grounding and power output

Sure to get more than 200+kw at wheels with these installed. These are to be sold with car. Please don't ask if I will sell them separately

This would be a great car for building up on. It has most of the parts installed to get the job done. Only parts you would have to add is front mount intercooler, big turbo or

YOU CAN GO EXTREME, IT'S UP TO YOU!

Still has 6 months warranty left. Has to April 2006 rego.

$15000

Anybody interested.    POST ME A MESSAGE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • Duncan
      R34 Handbrake light saying ON and intermittently flashing

      By Duncan · Posted

      ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • Duncan
      R32 GTS (RB20DE) Injectors Replacement

      By Duncan · Posted

      OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...