Jump to content
SAU Community

Recommended Posts

OK there seems to be a lot of interest. I'll order what I can and let you all know when they are in my hand before I take money off anyone. I'll have to confirm the price as I'm not sure how much the postage will be. I will offer them in order from who replied first on this forum sound fair.

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

ok man, screw that paper model, the damn front end is CRAZY to get right...

Yeah it is, took me 3 or four goes to get it right, but now I have about 4 of them on my desk :)

Oh and great idea for the model Emanuel and sorry for hijacking your thread with the paper thingy :P

Where's the picture? :)

Furthur up in this thread :)

And for those of you who are cheap arses like me, build one out of paper :D

http://www.nissan.co.jp/EVENT/PAPERCRAFT/PDF/stagea.gif

stagea.gif

Other models can be found here:

http://www.nissan.co.jp/EVENT/PAPERCRAFT/s.html

And other makes/models here:

http://www2.nkansai.ne.jp/shop/first/pcraft/t-models.html

Thanks to Squizz for sharing the link :(

Work.......? What is that?? <busy cutting up the calsonic paper model> :D

Aaaaaaanyway, back ontopic, I wouldnt mind a model, but dont have the patence for building models, never have.

On the other hand, I wounder if you could get a Stagea shell for a 4wd RC car.....?

Work.......? What is that?? <busy cutting up the calsonic paper model> ;)

Aaaaaaanyway, back ontopic, I wouldnt mind a model, but dont have the patence for building models, never have.

On the other hand, I wounder if you could get a Stagea shell for a 4wd RC car.....?

I'm with him!

I suck at "teh model making" so I won't even bother putting my hand up, as much as I want one! I'd just ruin it and then be p!ssed off at myself for rushing it. :)

However, if anyone should happen to find a 1:18 scale die-cast Stagea, I'll DEFINITELY be in!

Price $35 deliverd Anywhere in AU or $30 pickup. They cost be a bit more in postage as I order all they had, 6 so 5 to sell. They are coming from Germany I had to pay in EUROS to get them. They should already be in the post to me.

The list:

Terminal

Stagen

AlexCim

beastien

bwilkeson

Burns

Muck

Mcnmg

qikstagea

ian

There are 10 on the list only 5 available, I'll update you all then they are in my hand.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...