Jump to content
SAU Community

Recommended Posts

This is my opinion from seeing a few done to other peoples cars, but I don't think that they are any good at the moment. I've seen them on a few different cars, including a 200SX and an R34GTR, both had serious problems.

The 200SX was an auto, and the E-manage says that it works with auto's, but it didn't, kept melting coil-packs. Upon quizzing TRUST about it they said that they had never actually tried it on an auto, they just assumed it would work.

I think that it is going through the teething problems that all EMS go through, and oneday it will be a very good product, but at the moment I don't think it is.

If anyone has another experiance then I'll be more than happy to hear it.

See'ya:burnout:

Link to comment
https://www.sau.com.au/forums/topic/9674-trust-e-manage/#findComment-147372
Share on other sites

  • 2 weeks later...

the emange is a interceptor type ECU, tuning is done via a laptop which is linked with what seems to be a 9pin serial <-> USB cable.

software is not bundled with the unit and needs to be purchased seperately.

16 x 16 (load vs RPM) in the basic package, much like a SAFC except this is load vs RPM.

Easy/Hard to tune? Dude that depends how competent YOUR tuner is...

What else do you need to know?

Link to comment
https://www.sau.com.au/forums/topic/9674-trust-e-manage/#findComment-161300
Share on other sites

ed,

This is correct. I have heard many a positive testimony to match the couple of negative ones. Try the e-manage forums (there are at least 3 that I know of). Most car owners are very satisfied.

After looking at the software it appears very intuitive.

Link to comment
https://www.sau.com.au/forums/topic/9674-trust-e-manage/#findComment-162254
Share on other sites

rev210, yes....and you can hook it up to a profec e-01 for the wank factor scale of 10/10 :rolleyes:

rev, can you PM me the forums? I'm very interested in reading more on them :D

cs, what are you confused about? depends how much you want to spend....basic package of the emanage works just like a SAFC but much cheaper than a PowerFC. You can slowly upgrade the emanage with the ignition harness and then the injector harness (if upsized injectors) and also hook it up to the e-01 to tune via the e-01's screen.

One thing I did notice with the software was if you upgrade injectors and you already have a basic tune BEFORE the injector upsize, you simply enter in the % increase of the injectors and it automatically adjust your maps to suit. :D

Perhaps wander down to your local tuner and see if they have done any emanage units.

Link to comment
https://www.sau.com.au/forums/topic/9674-trust-e-manage/#findComment-162609
Share on other sites

People's good exeriences and success are far more valuable than negative feedback, except where the negative feedback is all you can find. This is simply not the case with the e-manage. I know I'd rather speak to someone who made the e-manage work than someone who couldn't, the guy who couldn't can only tell you what not to do.

Link to comment
https://www.sau.com.au/forums/topic/9674-trust-e-manage/#findComment-162925
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...