Jump to content
SAU Community

Recommended Posts

Hello,

I am selling a NEW, UNUSED number plate. it is W4NTED. I brought it, and have not yet got a car to put it on, and it's costing me too much to keep it. So i'm getting rid of it. It is custom yellow number plate (black writing on yellow background, but the oclour can be changed for a small fee)

I have read a number of articles about custom plates, they reckon that the value of custom plates are going up (it sure shows in their cost from the RTA). So this is a bargin asset for all you young entrepreneurs out there.

The plate is on hold at the RTA in Forestway. It can be picked up from there or transfered to any other RTA you like for like <50$ (don't quote me)

I am accepting ANY offers over $800

Please enquire. you can e-mail me @ [email protected] or call me on 9449 7772 after 4pm on weekdays

http://carpoint.ninemsn.com.au/DesktopDefa...lias=carpointau

Thanks all,

Mitchell

Edited by mitch_f1
Link to comment
https://www.sau.com.au/forums/topic/96805-w4nted/
Share on other sites

So let's see, you don't even HAVE the plates, ithey're on HOLD.... yet you want $1000 for them. Hmmmmm....

But I have NSW plates in my POSSESSION that say 2WISH4 but can't get $400 for them. Interesting how the RTA works down there.

Link to comment
https://www.sau.com.au/forums/topic/96805-w4nted/#findComment-1797029
Share on other sites

Yeh I brought them, nad was anticipating getting a car, but christmas and photography is sapping my funds, so it needs to go.

thanks

Edited by mitch_f1
Link to comment
https://www.sau.com.au/forums/topic/96805-w4nted/#findComment-1797767
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

common, to buy these off the shelf is about $500 anyway....slightly under. I am happy to accept how much they go for at the RTA (around $450).....you even call them up, to buy a new custom plate is $450, and for the staorage is $50 (it has stoorage until April).

Mitch

Link to comment
https://www.sau.com.au/forums/topic/96805-w4nted/#findComment-1900531
Share on other sites

  • 1 month later...

I am considering selling it for less than what the RTA asks for a new custom number plate ($450+......go ask for yourself)

I need to get some cash back on this, so I am considering any offer. I will still give the free photoshoot as well.

Mitch

Link to comment
https://www.sau.com.au/forums/topic/96805-w4nted/#findComment-1983129
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • End game is to: - Remove all the slop from old worn parts - Adjust setup so that the wheels actually fit and the car is drivable (currently it is not because of the extreme rubbing on the guards).   Progress over the last couple of days, removed the rear hubs! Next steps: - Buy bushings - Replace bushings/bearings on hub - Reinstall
    • Cracked deck  And other cam snap stuff   
    • A few random issues have popped up since my last update. My WMI pressure sensor failed within about 10 minutes of it seeing liquid. It was a 20$ China special, so I'm not surprised. My name brand replacement should arrive today.  My power steering assist also decided to crap out last weekend. The usual, works for about 60 seconds after starting the car then I lose it. I dusted off my old copy of NDS and connected to the HICAS ECU. Code 4 for assist solenoid.... I tested the solenoid and it's fine.  I knew the day where my HICAS ecu would crap out would come, and I welcome it. It was the last HICAS part on the car that is now in the bin. I've ordered an SSR and I will control the power steering solenoid with my Haltech ecu. It will be nice to have proper speed referenced assist again after all these years.   
    • Haha I just finished the last season of TPB: Jail last month. I'm happy they're still pumping out episodes. 
×
×
  • Create New...