Wtd: Rb20 And 26 Eprom Files

[MadR32GTS-4]

Hi all,

Just starting to play around with the idea of eprom tuning. Just wondering if anyone has the bin and adr files for a RB20DET [silver top]?

Looked around everywhere but keep getting dead links.

Any help would be great.

Cheers,

Shaun

[inissane]

rb20det.com

grab the bin from there

and below is the contents of the adr file, drop the text into a .txt notepad file then rename its file extension .adr.....

and then tell me what to do with them :lol:

i have the rom editor 1.98 program thingo but thats as far as ive gone

Edited December 3, 2005 by inissane

[inissane]

#

#

# NISSAN HCR32 RB20DET MAP ADDRESS (E)

#

# Variable,Start-Address,X,Y,Map size,value,Map-name

#UNIT NAME

TYPE_UNIT,HCR32(RB20DET) type-M,*,*,*

#HIGH/LOW octane Fuel map.

HIGH_FUEL,&H7D00,16,16,256,1,High octane Fuel map

REG_FUEL,&H7500,16,16,256,1,Low octane Fuel map

#HIGH/LOW octane Ignition time map.

HIGH_FIRE,&H7400,16,16,256,1,High octane Ignition timing

REG_FIRE,&H7C00,16,16,256,1,Low octane Ignition timing

#K required number

K_DATA,&H7F2B,2,1,2,1,K Multiplyer

#Void blast-off time

IGN_TIME,&H7F88,1,1,1,1,Injectors Lag time

#Feedback control

FB_SWITCH,&H7F91,1,1,1,1,Start Temp for Closed Loop

#VQ map

VQ_MAP,&H7A70,16,1,128,1,AFM Voltage Correction Map

#Fuel/Ignition time TP scale

TP_SCALE_FUEL,&H7AF0,16,1,16,1,TP scale (Fuel)

TP_SCALE_FIRE,&H7B10,16,1,16,1,TP scale (Ignition time)

#Fuel/Ignition time RPM scale

RPM_SCALE_FUEL,&H7B00,16,1,16,50,RPM scale (Fuel)

RPM_SCALE_FIRE,&H7B20,16,1,16,50,RPM scale (Ignition time)

#TTP MAX/MIN

TTP_MAX,&H7E90,16,1,16,1,MAX Injection Quantity

TTP_MIN,&H7E80,16,1,16,1,MIN Injection Quantity

#TP Limit

AF_LIMIT,&H7960,16,1,16,1,AFM Fuel Cut

#Rev.Limit

REV1_LIMIT,&H7F8b,1,1,1,50,Rev Limiter 1

REV2_LIMIT,&H7FB4,1,1,1,50,Rev Limiter 2

#Speed Limit

SPEED1_LIMIT,&H7A0A,2,1,1,2,Speed Limit 1

SPEED2_LIMIT,&H7A0B,2,1,1,2,Speed Limit 2

SPEED3_LIMIT,&H7FA5,2,1,1,2,Speed Limit 3

#Add.map 1

ADD_MAP1,&H7940,16,2,32,1,Idle control (MAX)

#Add.map 2

ADD_MAP2,&H7980,16,2,32,1,Idle control

#ADD.map 3

ADD_MAP3,&H7E40,16,1,16,1, Fuel Increase Vs Temp (-40 to 110 deg Celcius)

#ADD.map 4

ADD_MAP4,&H7E60,16,1,16,12.5, Target idle rpm table (-40 to 110 deg Celcius)

#ADD.map 5

ADD_MAP5,&H7E10,16,1,16,1, Idle ignition timing table (other than neutral)

#ADD.map 6

ADD_MAP6,&H7EA0,16,1,16,1, Idle ignition timing table (neutral)

#ADD.map 7

ADD_MAP7,&H7B60,16,2,32,1, Ignition Coil duty table

[MadR32GTS-4]

Thanks for that.

I'll let u know how I go.

Cheers,

Shaun

[Johnzm]

are you sure that the BIN file on RB20DET.com is a good bin? the #'s seem to go a little funky on the maps

can anyone provide a different map?

[rob82]

Just remove your EPROM and read it. Then edit that binary image.

[RedDrifter]

That bin file from RB20det.com is my stock bin file from my 92 r32.

Its version is MEC-R212B and it does work in earlier version 1989 R32 ecu's aswell.

Look at the http://forum.ztechz.net/

lot of stuff there that can help you out.

[Johnzm]

just a question

is everyone else using ROM EDITOR 1.98.41E to work with their bin's? the program isint exactly what id call user friendly lol

[RedDrifter]

Just make sure you have the japanese text support installed on the pc or rom editor will goe all screwy.

[MadR32GTS-4]

Thanks guys. That RB20 bin goes fin in my GTS-4.

Anyone got RB26DETT bin and adr files?

[RedDrifter]

Thanks guys. That RB20 bin goes fin in my GTS-4.

Anyone got RB26DETT bin and adr files?

<{POST_SNAPBACK}>

GTR Address File(Romeditor)

If you want a GTR bin file just email me.

Cheers Lads.

#

#

# NISSAN BNR32 RB26DETT MAP ADDRESS (E)

#

# Variable,Start-Address,X,Y,Map size,value,Map-name

#UNIT NAME

TYPE_UNIT,BNR32(RB26DETT) GT-R 2,*,*,*

#HIGH/LOW octane Fuel map.

HIGH_FUEL,&H7D00,16,16,256,1,High octane Fuel map

REG_FUEL,&H7200,16,16,256,1,Low octane Fuel map

#HIGH/LOW octane Ignition time map.

HIGH_FIRE,&H7400,16,16,256,1,High octane Ignition time

REG_FIRE,&H7C00,16,16,256,1,Low octane Ignition time

#K required number

K_DATA,&H7F2B,2,1,2,1,K required number

#Void blast-off time

IGN_TIME,&H7F88,1,1,1,1,Void blast-off time

#Feedback control

FB_SWITCH,&H7F91,1,1,1,1,Feedback control

#VQ map

VQ_MAP,&H7A70,16,1,128,1,VQ map

#Fuel/Ignition time TP scale

TP_SCALE_FUEL,&H7AF0,16,1,16,1,TP scale (Fuel)

TP_SCALE_FIRE,&H7B10,16,1,16,1,TP scale (Ignition time)

#Fuel/Ignition time RPM scale

RPM_SCALE_FUEL,&H7B00,16,1,16,50,RPM scale (Fuel)

RPM_SCALE_FIRE,&H7B20,16,1,16,50,RPM scale (Ignition time)

#TTP MAX/MIN

TTP_MAX,&H7E90,16,1,16,1,TTP MAX

TTP_MIN,&H7E80,16,1,16,1,TTP MIN

#Acceleration increase volume

ADD_FUEL,&H7200,16,1,16,1,Acceleration increase volume

#Rev.Limit

REV1_LIMIT,&H7FB4,1,1,1,50,Rev. Limit 1

#Speed Limit

SPEED1_LIMIT,&H7FA5,2,1,1,2,Speed Limit 1

#Add.map 1

ADD_MAP1,&H7940,16,2,32,1,Idol getting a stabilization control

#Add.map 2

ADD_MAP2,&H7B30,16,2,32,1,Temperature of the water value conversion

#Add.map 3

ADD_MAP3,&H79E3,9,1,9,1,Knock limit

[tay-fu300zxtt]

i just lost all my tunes on my external hard drive ;(

does anyone have any tunes for 1000cc injectors, t8834d turbo for a rb26??

email [email protected] underscore between the y and f

thanks tay

[Dose Pipe Sutututu]

What ECU?

What injectors?

What AFM/MAP sensor?

How does losing an external drive automatically remove a tune from your ECU? Lol

[tay-fu300zxtt]

I bought a haltech before I could upload it to the ECU from the hard drive , I broke the hard drive. Here is the hard drive

rb26dett tiwth t8834d , 1000cc injectors high impedance 12.5 ohms, haltech

http://imageshack.com/f/idutFnkfj]http://imageshack.us/v2/150x100q90/661/utfnkf.jpg

[tay-fu300zxtt]

I can email you my damaged hard drive, imaging is not working [email protected]