Jump to content
SAU Community

Recommended Posts

Hey guys, Im running a completely stock R34 GTT, with the exception of a K & N pod filter..

i was just wondering, would i get any more power, by simply installing a boost controller? and whats the maxium all the stock stuff can take?

if u have any other ideas that would increase my power and are simple mods, please let me know

cheers.

Link to comment
https://www.sau.com.au/forums/topic/97956-boost-controller/
Share on other sites

The stock turbo does tend to break around 12psi but some have run higher and not had any/many problems. It all depends on the amount of reliability you want.

The first thing would be to remove your restriction i.e Exhaust. If you're going to put a boost controller on, you may be able to up the boost a little.

I have 3" split dump exhaust system, cold air box with pod filter but I now have high-flowed my turbo. I'm running 12psi without a problem but I'm not pushing it much in this heat and my front mount cooler should be here next week.

Most people who have increased the boost in their car have at least exhaust done.

Link to comment
https://www.sau.com.au/forums/topic/97956-boost-controller/#findComment-1779758
Share on other sites

Oh ok thanks guys, with th exception of puttin a 3' exhaust, is there any other things that would increase the power, or should i simply go with the new exhaust then FMIC, then boost controller?

thanks

Link to comment
https://www.sau.com.au/forums/topic/97956-boost-controller/#findComment-1780000
Share on other sites

does it really matter how cold the air going into turbo is, doesnt it all end up the same temp after going through the turbo?\

indeed it can make a big difference with a good cold air induction setup/pod vs just a pod sucking hot air

Link to comment
https://www.sau.com.au/forums/topic/97956-boost-controller/#findComment-1780324
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...