Jump to content
SAU Community

Recommended Posts

  • Replies 100
  • Created
  • Last Reply

Top Posters In This Topic

Well since I own a imac VL myself I cant really say. :)

For the record not ALL VLs are pieces of shit and not all of the drivers are wankers.

VLs can be a great car if in kept in great condition, just look at mine for a good example, Racsov500 knows what im talking about. :(

IMO VLs have so much more style then R31s.

Also if you buy a VL make sure its a 5 speed, Autos are slow and have no balls (Unless its Turbo).

Edited by RyanVLSL
Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868242
Share on other sites

I do know of some parts that holden no longer stock for the vl.

Unsure if Nissan are different.

Great thing about VLs is parts are so easy to find because you can go to Holden or Nissan. :)

I got my head gasket from Nissan and my Alternator is from a R31. :(

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868254
Share on other sites

I'm about to buy my first car, i have always wanted an R31 and i have also thought about the VL. You can find many r31s which are not thrashed, unlike the VL's.

I would go the R31...

Just a question...Would you guys go the series 3 TI or a series 3 Auto Silo?

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868310
Share on other sites

I havent had that problem yet with mine as it hasnt had no major dramas, hell it still hasnt cracked it's head yet lol that must be rare for VLs. :(

It is pretty silly asking whether to buy a VL or a R31 on a Skyline site as the R31 would get the thumbs up just like if it was posted at CT the VL would get the thumbs up.

Even if this was asked at Boostcruising I still think it would be biased towards R31s as most people there dont have a clue about VLs all they see them as is Bogan Pieces of shit. :)

Well I certainly have not regretted my decision owning a VL, infact I like them so much I want to buy one with a V8 this time around. :)

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868316
Share on other sites

for looks it's down to personal preference.

Call me biased because I have a 31 (on my 3rd) but I really don't like the way VL's look. They look to me like Holden got lazy when it caime to facelift the Commodore so they made the VL look like a stretched and warped Camira.

I'll concede that the 31s are boxy, but I think they pull it off, and bugger me if I don't think they're dead sexy when there neeat and tidy (i.e. looked after), lowered to the right height with the right set of wheels and a cooler poking out the front end.

When my Simmons arrive in a few weeks, I'll show you what I mean. :)

Edited by Bluprint
Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868407
Share on other sites

Well my personal prefference is the VLs are one of the nicest looking cars from the 80s. :)

This is a honest opinion when I say this but in the looks department VLs look 100% better then R31s, R31s are a bit to ugly.

Also you cant really say one is better then the other because remember they are both over 18 years old and some perform better then others, if you were comparing them brand new thats a different story. :)

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868438
Share on other sites

At the end of the day the R31 has a better build quality, is more reliable and is much less likely to have had a hammering.

This is what it really comes down to when buying an old car, especially if its your first car as money is likely to be thin, you don't want to be spending money you don't have on repairs.

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868576
Share on other sites

Great thing about VLs is parts are so easy to find because you can go to Holden or Nissan. :) I got my head gasket from Nissan and my Alternator is from a R31. :)

You'd be stupid to buy parts for an rb30 from Holden. They are exactly the same parts stocked by Nissan, only more expensive.

for looks it's down to personal preference.

Call me biased because I have a 31 (on my 3rd) but I really don't like the way VL's look. They look to me like Holden got lazy when it caime to facelift the Commodore so they made the VL look like a stretched and warped Camira.

I'll concede that the 31s are boxy, but I think they pull it off, and bugger me if I don't think they're dead sexy when there neeat and tidy (i.e. looked after), lowered to the right height with the right set of wheels and a cooler poking out the front end.

lol @ Stretched and warped Camira.

Couldn't have said it better myself. Although only specifically refering to the series 3 r31, I'm not so much a fan of the earlier Pintara look-a-likes.

Also you cant really say one is better then the other because remember they are both over 18 years old and some perform better then others, if you were comparing them brand new thats a different story. :(

Read a few articles that you can find that compared vls and r31s when they were first released. r31 won easily for all the reasons already stated. Also I believe r31s are a bit quicker due to the better diff ratios. 3.7 for manual and 3.9 for auto, whereas the vl has the one 3.45 ratio.

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1868817
Share on other sites

The diff ratio difference is kind of offset a bit by the VL being around 50-100kg lighter than the R31, depending on the variant.

Either way, each time I've seen an "acceleration comparison" *cough*, back in my irresponsible teenage years, I only saw a VL in front once.

non turbo against non turbo of course

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1869043
Share on other sites

r31 parts and vl parts are cheap as chips

the prices are almost identical, except nice calais turbos go for shitloads

it comes down to personal preference in the end. I wouldnt touch a vl unless it was a calais turbo, in which case I would probably end up taking the engine out and putting it in a r31

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1869075
Share on other sites

At the end of the day the R31 has a better build quality, is more reliable and is much less likely to have had a hammering.

This is what it really comes down to when buying an old car, especially if its your first car as money is likely to be thin, you don't want to be spending money you don't have on repairs.

Yes but that doesnt mean a VL cant be a good car. :P

Also it seems the reason why there arent so many thrashed R31s as VLs is because R31s werent a mass produced family hack like the VLs, also VLs seem to appeal more to the "Dickhead young blokes" unfortunatley.

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1869081
Share on other sites

r31 parts and vl parts are cheap as chips

the prices are almost identical, except nice calais turbos go for shitloads

it comes down to personal preference in the end. I wouldnt touch a vl unless it was a calais turbo, in which case I would probably end up taking the engine out and putting it in a r31

Yes Nick thats why you're so envious of my VL lol. :P

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1869089
Share on other sites

The gts should have come with it

Nissan wanted to do a turbo GTS but didn't for a lot of reasons that are still unclear, stuff like they wouldn't produce it without an intercooler, but having one would have driven the development and sale costs too high, Nissan engineers wouldn't approve them without 5 stud hubs, etc etc, though I personally don't believe the 5 stud hub one

There was a concept prototype Silhouette GTS with an intercooled RB30ET that ran something like 200kw/400Nm and a flat 14 second 1/4 mile, which was awesome for 1987/88 6 cylinder

Link to comment
https://www.sau.com.au/forums/topic/98189-r31-or-vl/page/5/#findComment-1871582
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...