Jump to content
SAU Community

Recommended Posts

Dude, you don't need to create a new thread exactly the same as one you posted in this morning.

And no there isn't a specific PSF that you have to use for your car.

I recommend Penrite Power Steering Fluid, about $9 for 500mL that can be bought from Autobarn. Or just get Penrite ATF Top-Up which is the exact same stuff for $10 for 1L.

Nath

You need to use special imported power steering fluid. It's refined in Japan by the government to use in military-experimental aircraft, but you should be able to import some with forged documents.

Failing this, I use the Castrol stuff from the local autoone. ;op

hey guys...

thanks for the replys....

baught the AFT top-up, 10 fini.

IS there any way of bleeding the fluid and how to.... coz id prefer to have the new good stuff flowing around.

and im sooooo sorry mr PHATR32 for taking up too much of your precious time, and im also sorry for failing to appreciate GODs abilities.

You could try the rack, there's prolly a bleeder or hose you can pull off there. I'm not sure if you'd have to bleed the system after that. (or if you can)

Check the hoses for the powersteering too, on the drivers side when you look down past the oil filter. R33's commonly leak there. (mine does).

You can pull off the return hose somewhere near the resevoir and allow it to empty into a bottle.. Just trying to rememeber the setup though. You can keep adding fluid so you keep it topped up and see clear stuff coming through the return hose. Once clear connect back up..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As I wait for parts to be delivered, I have managed to procure via a contact a R32 Nistune ECU......for now I just want to monitor what the car is doing but eventually.......who knows where we go 😂
    • To back this up, I'm always looking on the outside, seeing the level, and then opening it up anyway, as I'm worried the level I've looked at, is more so a scunge line. Then you end up dipping your damn finger in it too depending on the type of tank you're looking at just to make sure I'm not going insane.   PS, Mark, polish up the none moroso one a bit and then give it a clear coat. The Moroso one looks to be way shiner (not mirror polished, just shinier) and it'll still look weird with the two different alloys beside each other. Either that, or Id probably paint them a flat black...
    • Good old Orange Park hey... 😛   f**k I miss that race track
    • lo, it was a death trap. Good times. Got any Fatz Drift Day DVDs still available?
    • Yes, overthinking. Many PS reserviors are completely opaque. Our Skyline ones, for example. Have to remove lid, peak inside, swirl the dipstick, try to remember how to read it, etc etc. Normal. Radiator overflows are often sufficiently opaque and scunged up that you can't see the true level inside anyway, and have to open and have a peak. Besides which, I replaced the (massively expensive, even back then) plastic overflow in my Alfa GTV, back in the '90s with a stainless one that I had a good fabricator make up to be dimensionally same-same, that looks remarkably similar to the Bogan's Moroso one above, and I never suffered any particular paranoia that I didn't know how much coolant was in it.
×
×
  • Create New...