Jump to content
SAU Community

Recommended Posts

We have one fitted to one of the race cars (not a Skyline), so far it has worked perfectly. Gives quick warm up and no cavitation at high rpm, plus we can run it after engine shut off to cool it down. Via the Motec we get to choose the engine running temperature, much easier and more accurate than using thermostats with various opening temperatures.

So far not a bad thing for a race car, I wouldn't be doing it on a road car though, to much hassle and no real advantage using it in that environment.

:) cheers :O

There was going to be an Autospeed article about it but after they presented the finding of their tests to Davies Craig they were threatened with legal action and therefore disn't publish the article.

Would have been interesting to read!

Thanks for the replies fellas. :D

Received an e-mail back from Davies Craig today and looks like the EWP 80 is too small for an RB and the EWP 110, which would be fine, can't be used with the current controller. There will be a new controller out in March/April apparently.

Edited by mambastu

On a VT commodore, it caused lots of problems and Davies Craig themselves had the car for 2 weeks and couldn't sort it out.

This was back when I owned a VP and was thinking of putting one on.

As far as street performance goes, there theoretically should be a very small gain, but I doubt you'd notice it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...