Jump to content
SAU Community

Recommended Posts

i was just wondering if you could convert the parking lights.... these ones:

parkers.jpg

into blinkers.

ive got an aftermarket bar that will need aftermarket blinkers that i dont really want to drill onto the bar.

i know you could just cut and connect the wires up, but is there anything else to it?

is the bulb in the parkers able to take the voltage of the blinker lines?

Edited by SECUR1TY
Link to comment
https://www.sau.com.au/forums/topic/98792-convert-park-lights-into-blinkers/
Share on other sites

It should be same voltage. If I don't see the current draw to be too high for the sockets etc either.

Re-wiring should be easy since you are going to be left with dangling blinker wires after your new front bar goes on...

Just remember to get orange blinker bulbs :P

Damn! I was thinking of doing this for the last few months. =-]

I thought the easiest way was to rerun the blinker wiring up to the parker socket, then soldering or crimping the blinker wire onto the parker globe socket.

That way, you don't need to worry about the current-draw, cause i'm sure the parker socket isn't going to be rated any differently to the blinker socket. All the lighting should be 12 volt, as has been said by "cc".

shouldn't be man. The blinkers usually run off a relay, which will blink double-speed if one of your other indicators isn't working.

Well, in my previous non-Nissan cars, that's how it worked. Usually the rear one was water-logged if the front one was going double-speed.

Interesting to find out if that is the case or not!

You will need to use orange bulbs or else its a defect.

But if your removing park lights, it will be a defect anyway.

When you get a rego check done, they will probally fail your car if its missing lights such as parkers.

So be warned...

drill a hole into your plastic housing and insert a clear white LED, then wire the LED in with a resistor to the park light connection. Instant parklight. You can then use the existing parklight as an indicator with an orange globe (or a clear globe that lights up orange).

we I have done this to my R33 2 years ago as the crapy trailer blinkers on the front bar looked sh!t, so put driving lights in the holes. moved the blinkers to the parking lights just rewire the the parker wires withthe blinker wires and change the wedge bulb with a orange glob!.....presto!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...