R31_GTSX

Are you able to run BCNR33000836 for me?

Plastic Covers off R33 GTR S1.5 Steering wheel Hi All, Anyone got a destroyed R33 GTR Steering wheel that i can get the plastic tabs off? The plastic cover plates that cover bolt holes on both sides, and the cover panel on the bottom. I'm pretty sure it needs to be from a S1.5 GTR.. because i grabbed some off a stanard R33 1.5 and they don't fit. Will post up pics of the plate sizes later on.

Found one over at Japco in Adelaide... this wheel is MINT ! Got his last one... Has a few S2 wheels there & a couple R34

Got the clockspring too. Cheers

Got a wheel now.. just need the clockspring with the "h". Anyone got one?

Hi Guys, Just chasing an R33 S1.5 Airbag Steering Wheel & Clock Spring Clock Spring to suit i believe is marked with a "H" Cheers

Keen to see how you go as my fan blower Isn't working at the moment either. From what I've read the AC Resistor can often be the cause. I believe its in your picture I'm just about to start troubleshooting mine in the next few days. I can't handle the thought of taking out the dash.. so hopefully everything is easily accessible. ! Good Luck

** Updated ** Still chasing a few parts Rear Parcel Shelf – Standard with speaker covers & child restraint points Glovebox Centre Console Lid with good working latch S1 or S2 Standard Steering Wheel R33 Good Condition Floor Mats Boot Carpet Boot Struts that will hold boot with spoiler up

Delayed Thanks Sin. Good work buddy.

CHeers mate but just after standard GTR mats. Thanks anyway.

Chasing a few R33 Parts off a S1 Might add more in the coming days R33 GTR Rims (with good tyres preferebaly) Parcel Shelf Factory – No Speaker Holes preferred Glovebox preferably with matching key Centre Console Lid with good working latch Dash Facia – Standard - Not painted .. & must be in good nick Ignition barrel with 2 x Nissan Keys - & matching lock set for 2 doors & boot (and glovebox too would be nice) R33 GTR Front Disc Rotors – must have plenty of life GTR Floor Mats Prefer Adelaide pickup but will definitely consider interstate

Any chance you could look up this one for me mate ? BCNR33002295 Any way of knowing what k's it had when it left Japan? Cheers

SOLD

added pics of the strut brace..

IF buying the front & rears together i'll make it $350 for all 4 corners. I've also got a Genuine Nissan GTR front strut brace for $110

KYB Shocks Brand New to suit R32 GTR Front kyb shocks $190 – shocks have been assembled with a standard r32 GTR spring.. Fitted them to my car, but then decided i was going with coilovers so took them out. (they shocks haven’t traveled a single km !) I believe the fronts will also fit a R32 GTS-T front. $190 Rear Kyb Shocks part Number 341151 $180 Brand new in box, never been fitted.. They have the square bracket down the bottom, so these will only fit the R32 GTR... (i think they also fit the z32 300zx rear) $180 Travis 0401 293 557 Pickup from Banksia Park, SA

Hey guys, Can anyone tell me the part numbers for KYB shocks front / rear to suit R32 GTR? Just after somthing fairly standard / similar to factory specs. I called a couple of places and got different answers... doesn't leave me overly confident. Cheers Travis

Yes that be me mate! Still got a bit of work to do but I'm getting there!

That woulda been me ! Yay i have been spotted.

Looking for a Hilux Xtra Cab Ute (with ute tub … not a tray) I had one previously but unfortunately had to sell it. Would be nice.. but not necessary… some rims, bit of chrome.. Must be manual, be in good mechanical condition, registered (not defected or anything like that) and be reasonably priced! Will also consider other that meet my specs I’m not looking for anything 4WD… just RWD. Pm me if you have something of interest…

Hi All, Looking very shortly at replacing a pair of standard R32 turbo’s which are getting noisy. Looking to replace them with a pair of N1 R34 turbo’s with Steel Wheels. Or rebuilt r32 or r33 turbos with steel wheels. Must have very minimal shaft play ! I’m on a tight budget, as I have a few other big jobs I need to do on the car… PM me with what you have, how many k’s, how much $ , pics if possible, and any more info… .

Great work mate, i look forawrd to getting the sucker off and having a look at it. If the fluid is traveling along the wiring then that could be my problem too. I reckon before I take it off I'll fill the reservoir, jack it up and then remove the white clip under the dash to actuate the pump.. Then just hope I can see the leak and be able to get to it with it still in the car. I hope the pump is still working!

Mate, can you give me some more details on n1 turbos. Are they steel wheels? Shaft play? Price without pipes. Pm me, I tried to pm you but wouldn't let me.

I'll take the turbos if he doesn't. Pm me mate.

Mine is the same, I fill the reservoir and within a couple if days it's almost empty... Leaving behind a trail of everywhere I've been over the two days. The light is on and I haven't refilled it, of late because it empties too quick. Is it possible the unit would have Shat itself with no fluid? I'm thinking when I get it off I should probably just replace it with a known working unit. Problem is getting the car off the road as I have no spare..